Don't be surprised that the signal of the electromagnetic flow meter is too weak

Abstract: The signal of the electromagnetic flowmeter is too weak, don't be surprised. The information is provided by the excellent flowmeter and flowmeter manufacturer and quotation manufacturer. Electromagnetic flowmeters generally operate normally for a long period of time without maintenance after installation, and then require maintenance and daily inspections. Not receiving a signal or a signal that is too weak are minor problems. So don't be surprised if it appears, do the following steps carefully. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following is the details of the article that the signal of the electromagnetic flowmeter is too weak. Electromagnetic flowmeters generally operate normally for a long period of time without maintenance after installation, and then require maintenance and daily inspections. Not receiving a signal or a signal that is too weak are minor problems. So don't be surprised if it appears, you can solve it by doing the following steps carefully. 1. First confirm whether the pipeline is full of fluid. 2. If the pipe is too close to the wall, the probe can be installed on the diameter of the pipe with an inclined angle, instead of the diameter of the horizontal pipe. The Z method should be used to install the probe. 3. Carefully select the dense part of the pipe and polish it well enough 4. Move each probe slowly and carefully around the installation point to find the maximum signal point to prevent the ultrasonic beam from being missed due to the scaling of the inner wall of the pipeline or the reflection of the ultrasonic beam out of the expected area due to the local deformation of the pipeline. The installation point that can receive a strong signal; 5. For the metal pipes with severe scaling on the inner wall, the scaling method can be used to make the scaling part fall off or crack, but it should be noted that this method is sometimes caused by scaling and the inner wall. Void and wire do not contribute to the transmission of ultrasonic waves. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Don't be surprised if the signal of the electromagnetic flow meter is too weak'
At the same time, as the recent research of KAIDI shows, the benefits of improved productivity and firm performance can make implementing basic management practices worth it.
Our vision serves as the framework for our level gauge and guides every aspect of our business by describing what we need to accomplish in order to continue achieving sustainable, quality growth.
We want to be careful and deliberate about developing KAIDI, from the platform we choose, to the way we approach it, to the methods we use.