Home | INFO CENTER |

NEWS

Measurement method of ultrasonic level meter and its application in water level monitoring

Measurement method of ultrasonic level meter and its application in water level monitoring

Features and applications of boundary level control vibrating bar level switches

Features and applications of boundary level control vibrating bar level switches

Analyze how to select radar level meter from antenna shape

The antenna is the eye of the radar level meter, and the shape of the antenna must be suitable for the physical properties of the electromagnetic wave. The shape of the antenna determines the focus and sensitivity of the radar wave, just like the sensitivity of a microphone.

Analyze how to select radar level meter from antenna shape

How to do a good job level meter instrumentation, instrumentation safety management approach

High quality instrumentation will undoubtedly significantly improve the reliability and stability of measurement and control, but in the process of daily use, if you can consciously strengthen the safety management of the instrument, it will make the instrument better used for level measurement and control, while also extending the service life of the instrument. So, how to do a good job in the safety management of instruments and meters?

How to do a good job level meter instrumentation, instrumentation safety management approach

Introduction to the categories of level measurement instruments

Different working conditions and different measuring media have led to the development of a wide variety of level measuring instruments. There are different classifications of level measuring instruments according to different instruments. In this paper, we mainly talk about the categories of level measurement instruments from two aspects, namely, measurement mode and measurement method.

Introduction to the categories of level measurement instruments

How to determine whether the instrumentation in industry meets the requirements of explosion isolation?

How about determining whether instrumentation in industry meets the requirements for explosion protection? This is a worthwhile learning point for users who need to use explosion-proof products or for partners who need to know about level instruments. The following Kaidi Energy Technology Co., Ltd. to introduce you to the relevant aspects of knowledge points!

How to determine whether the instrumentation in industry meets the requirements of explosion isolation?

The difference between radar level meter and RF Admittance level switch

RF Admittance Level Switch is a common level measurement switch with wide application, mainly used for the level measurement of plastic, feed, grain, rubber, medicine, sand, food, cement, paint, clothing, pulp and other materials. When it comes to RF Admittance level switch, many people will question: What is the difference between RF Admittance level switch and radar level meter?

The difference between radar level meter and RF Admittance level switch

What are the common failures and solutions of float level meter?

What are the common failures and solutions of float level meter? This paper mainly discusses this issue.

What are the common failures and solutions of float level meter?

What is the standard output signal of commonly used transmitters?

Industrial production often use transmitters, such as pressure transmitters, temperature transmitters, liquid level transmitters, etc., but the standard signal of these transmitter class is clear? Pressure transmitter class standard signal transmission why is 4 ~ 20mA, rather than 0 ~ 20mA?

What is the standard output signal of commonly used transmitters?

Selection of level measuring instruments for coal ash silos and coal ash hoppers in power plants

In the process of burning coal in thermal power plants, a large amount of coal ash is generated. This coal ash is usually collected in coal ash bins and coal ash hoppers. In order to avoid the stored coal ash from bubbling up the tank, it is quite necessary to detect and control the height of the coal ash material level.

Selection of level measuring instruments for coal ash silos and coal ash hoppers in power plants

How to detect the good and bad of ultrasonic transducer in the process of overhaul.

Ultrasonic transducer, also known as ultrasonic probe, is a key component of the ultrasonic level meter, and it is not too much to say that it is the "heart" of the ultrasonic level meter. The ultrasonic transducer converts high-frequency high-voltage power into high-frequency mechanical vibration, and the maximum power output can reach several kilowatts, so the stability and power output of the ultrasonic transducer plays a very important role in the performance of the ultrasonic level transmitter.

How to detect the good and bad of ultrasonic transducer in the process of overhaul.

Liquid level alarm switch wiring method and precautions introduction!

Liquid level alarm switch is widely used in water conservancy, chemical, environmental protection, food and pharmaceutical industries, etc. It is a liquid level measuring instrument specially designed for vessels, tanks and various pipelines.

Liquid level alarm switch wiring method and precautions introduction!

Analysis of the working principle and advantages and disadvantages of guided wave type radar level meter!

The guided wave radar level meter has a different working principle compared to other radar level meters and has its own advantages and shortcomings. It is very important for users, especially purchasers, to know this information for proper selection. Below, the principle and advantages and disadvantages of the guide wave radar level meter are described below.

Analysis of the working principle and advantages and disadvantages of guided wave type radar level meter!

From the concept and principle of RF conductivity to see how its correct selection

With the development of RF level detection technology, capacitive products have gradually developed into conductive products, which can be used to measure the level of media in containers under different working conditions. However, from the communication with users, many users still know little about the principle of RF Admittance and RF Admittance level switch, and they do not know how to select the correct type.

From the concept and principle of RF conductivity to see how its correct selection

Application occasions of mini tuning fork switch

The mini tuning fork switch, also known as the compact tuning fork level switch, is relative to the tuning fork level switch. At present, small tuning fork switches mainly include compact tuning fork level switches and high-temperature compact tuning fork level switches. So why develop small tuning fork switch when there is tuning fork switch?

Application occasions of mini tuning fork switch

BETTER TOUCH BETTER BUSINESS

Contact Sales at KAIDI.

CONTACT US

Copyright © 2021 Guangdong Kaidi Energy Technology Co., Ltd. | All Rights Reserved

Chat Online 编辑模式下无法使用

Leave Your Message inputting...

We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist

*Name：

*Phone：

*E-mail：

*Content：