Guangdong Kaidi Instrumentation's UZC series magnetic flap level gauge has been favored by many customers after 25 years of deep research and development, and now it has been widely used in various types of storage tanks, storage tanks, storage tanks, storage tanks and other pressure vessels in the petroleum, chemical, oilfield, pharmaceutical, food, wine and other industries. But because of its wide applicability, a variety of working conditions vary greatly, which puts forward high requirements for its purchase. Today we will talk about the UZC magnetic flap level meter purchase guide.

Normally speaking, the following points should be noted when purchasing magnetic flap level gauge:

First, first determine whether UZC magnetic flap level meter can meet the measurement requirements of the actual working conditions to determine whether to buy and which model.

Second, when selecting the model, you should first determine the installation mode of UZC magnetic flip-plate level meter, which also determines its basic structure form.

Determine the center distance of the process flange, that is, the measuring range of the magnetic flip-plate level meter.

Determine the process pressure and process temperature.

Fifth, to determine the type of measurement medium and whether it is corrosive.

Sixth, pay attention to the measured medium temperature is higher or lower, viscosity is larger when the selection.

Seven, the need for remote monitoring and recording when the selection.

In the user of the UZC magnetic flap level gauge made in china for the purchase, need to be based on these parameters mentioned above to the sales staff to determine the selection of products.

Especially in some high temperature, high pressure, strong corrosion and other extreme working conditions of the product should be clear about the required parameters, so that the UZC magnetic flap level meter can be better used.

Of course, Hikoda Instrumentation is also equipped with a professional sales team and a team of engineers to provide you with one-on-one product model description, installation and use of a series of consulting and other ancillary services. This is one of the reasons why we can be loved and trusted by many customers.