As we all know, the formation of an explosion needs to meet three conditions, namely for oxygen, explosive gases, detonation source. Explosion-proof measures must be taken in the electrical engineering, installation and construction, operation and maintenance and safety and technical management of explosion-hazardous places to achieve overall explosion-proof. The use of explosion-proof instrumentation without safety hazards can play a real protective role.

As one of the best liquid level gauge manufacturers, Guangdong Kaidi Energy Technology Co., Ltd. shares a discussion on the selection of radar liquid level gauges. The height of the liquid medium in the container is called the liquid level, and the instrument used to measure the liquid level is called the liquid level gauge. Liquid level gauge is a type of level instrument.

What is the concept of T1~T6 temperature among explosion-proof levels? This is a point of knowledge for those who need to select explosion proof pressure transducer or want to understand this knowledge. The next Guangdong Kaidi Energy Technology Co., Ltd. to introduce you to this knowledge point!

What is the special role of the wave guide rod in the guided wave radar level meter? The working principle of the guided wave radar level meter is that after the microwave pulse is guided downward along the guided wave rod and reaches the measured medium, part of the signal will be reflected back, and then the level height of the measured medium will be obtained by the time difference between the measured signal transmission and reception.

As a manufacturer of level meters and liquid level instruments, we are certainly familiar with PTFE material. When I first joined the industry, I also searched the website many times, such as, what is PTFE material? What is PTFE material? What is the material of ferrite? And so on these questions, now let me introduce you to it.

On-site manual measurement was the most common method of river water level monitoring before the emergence of ultrasonic flow meters. However, with the development of technology, the shortcomings of this simple and primitive method have become more and more obvious.

The antenna is the eye of the radar level meter, and the shape of the antenna must be suitable for the physical properties of the electromagnetic wave. The shape of the antenna determines the focus and sensitivity of the radar wave, just like the sensitivity of a microphone.

High quality instrumentation will undoubtedly significantly improve the reliability and stability of measurement and control, but in the process of daily use, if you can consciously strengthen the safety management of the instrument, it will make the instrument better used for level measurement and control, while also extending the service life of the instrument. So, how to do a good job in the safety management of instruments and meters?

Different working conditions and different measuring media have led to the development of a wide variety of level measuring instruments. There are different classifications of level measuring instruments according to different instruments. In this paper, we mainly talk about the categories of level measurement instruments​ from two aspects, namely, measurement mode and measurement method.

How about determining whether instrumentation in industry meets the requirements for explosion protection? This is a worthwhile learning point for users who need to use explosion-proof products or for partners who need to know about level instruments. The following Kaidi Energy Technology Co., Ltd. to introduce you to the relevant aspects of knowledge points!

RF Admittance Level Switch is a common level measurement switch with wide application, mainly used for the level measurement of plastic, feed, grain, rubber, medicine, sand, food, cement, paint, clothing, pulp and other materials. When it comes to RF Admittance level switch, many people will question: What is the difference between RF Admittance level switch and radar level meter?