loading
Home   |   INFO CENTER   |   NEWS   |  

What checks should be done after the installation of the radar level meter before it is powered on and put into use!

Home  >  INFO CENTER  >  NEWS  > 

What checks should be done after the installation of the radar level meter before it is powered on and put into use!

What checks should be done after the installation of the radar level meter before it is powered on and put into use!

2023-02-14

Radar level meter is widely used in energy, petrochemical, metallurgy, building materials, water conservancy, food and other industries, which is inseparable from its advantages of low maintenance, high performance, high accuracy, high reliability and long service life. Since the transmission of microwave signal is not affected by the atmosphere, the advantages of radar level meter are more obvious compared with contact instruments such as capacitor and hammer. It can meet the requirements of harsh environments such as high temperature, high pressure, steam, vacuum and high dust and volatile gas in the process, and be applied in harsh environments such as high temperature, high pressure, vacuum, steam, high dust and volatile gas to continuously measure different levels.

  However, to make the radar level meter work better, the inspection work before using the radar level meter after installation is essential. Generally speaking, the following aspects need to be checked.

news-What checks should be done after the installation of the radar level meter before it is powered

1、Conduct site inspection

  During the site inspection, pay attention to observe whether the actual site conditions match with the model of the radar level meter, and confirm whether the installation environment has affected the use of the instrument, whether the installation position is correct, etc., in order to minimize and avoid the emergence of faults, affecting the normal use of the instrument. Therefore, on-site inspection of the radar level meter is a more basic work to ensure the stable and normal operation of the meter and should not be ignored.

news-Kaidi Sensors-What checks should be done after the installation of the radar level meter before

2、Conduct connection check

  This check overlaps with the field check, mainly by connecting the corresponding software and observing the linear development of the radar level meter. Generally speaking, the instrument with key can realize this function. Of course, users can also check the connection of the radar level meter through professional instruments to determine whether the radar level meter can operate normally.

news-Kaidi Sensors-img

3、Conduct power-on inspection

  After powering on, it can be observed whether the radar level meter enters gradually according to the normal start-up procedure and displays normally. And many abnormal phenomena are found after energizing, and some of them are even not energized at all, resulting in the instrument will not work normally. Therefore, under the condition that the site allows, power-on inspection should be carried out to observe whether the performance of the parameters of the radar level meter is normal.

   The above three points are common ways to check the radar level meter after its installation to ensure that the instrument can be used normally and does not affect the normal progress of work.


Chat Online 编辑模式下无法使用
Leave Your Message inputting...