loading
Kaidi Sensors  >  AI - Page Sitemap  >  Kaidi Sensors radar level sensor supply for detecting
Kaidi Sensors radar level sensor supply for detecting

Kaidi Sensors radar level sensor supply for detecting
  • Kaidi Sensors radar level sensor supply for detecting
  • Kaidi Sensors radar level sensor supply for detecting
  • Kaidi Sensors radar level sensor supply for detecting
  • Kaidi Sensors radar level sensor supply for detecting
  • Kaidi Sensors radar level sensor supply for detecting
  • Kaidi Sensors radar level sensor supply for detecting
  • Kaidi Sensors radar level sensor supply for detecting

Kaidi Sensors radar level sensor supply for detecting

Kaidi Sensors is developed by our professional R&D team, based on application scenarios and usage characteristics in the market. The product is focused to overcome the shortcomings among similar products. Its power ratings can be customized e based on requests
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Kaidi Sensors is developed by our professional R&D team, based on application scenarios and usage characteristics in the market. The product is focused to overcome the shortcomings among similar products. Its power ratings can be customized e based on requests
2. The product is assured to be safe for the property and people, and has correct functioning to reduce the ecological impact. This product has a high level of IP
3. The product is corrosion resistant. It has been tested under salt mist, including neutral salt mist and acid-salt spray. This product is not susceptible to cracks
4. The product has good insulation performance. It has passed the high-voltage insulation test under different rated voltage conditions. There is little variation between its measuring values

Characteristics of water conservancy industry application:

Ø  Radar level meter adopts a recommended industry emission frequency of 26GHz, so it has beam angle is small, concentrated energy, has stronger anti-interference ability and greatly improves the precision and reliability of measurement.

Ø  Small antenna size, easy to install and dustproof cover antenna protection device.

Ø  Light weight about 1KG, easy to install.

Ø  The measurement range of up to 70 meters, covering a large reservoir water level measurement.

Ø  With a variety of output circuit interface and data acquisition system.

Ø  The pulse working mode, radar level meter transmit power is very low, no harm to human body and environment.

908 :

ApplicationRivers, Lakes, Shoal
Measuring   Range: 30 meters
Process   ConnectionThread G1½ A /Frame /Flange
Process  Temperature -40 ~ 100
Process   Pressure:Normal pressure
Accuracy ± 3mm
Protection   GradeIP67 / IP65
Frequency   Range:26 GHz
The signal   Output:  RS485 / Modbus  ( 6~24V  DC) 4~20mA / Hart  Two  wire ( 24V DC) 
Power Supply   : (6 - 24V)   DC  / Four-wire    24V DC / Two  wire
The Scene   DisplayOptional
Outer Covering   : Aluminum /Plastic   /Stainless steel 
Outer   Covering: Aluminum /   Plastic /Single chamber



909 :

ApplicationRivers, Lakes, Shoal
Measuring   Range: 70 meters
Process   ConnectionThread G1½ A /Frame /Flange
Process  Temperature -40 ~ 100
Process   Pressure:Normal pressure
Accuracy ± 10mm
Protection   GradeIP67 / IP65
Frequency   Range:26 GHz
The signal   Output:  RS485 / Modbus  ( 6~24V  DC) 4~20mA / Hart  Two  wire ( 24V DC) 
Power Supply   : (6 - 24V)   DC  / Four-wire    24V DC / Two  wire
The Scene   DisplayOptional
Outer Covering   : Aluminum /Plastic   /Stainless steel 
Outer   Covering: Aluminum /   Plastic /Single chamber

Kaidi Sensors radar level sensor supply for detecting-1


1.   Installation

l  Preparation before installation:

Ø  Please pay attention to the following matters, to ensure that the instrument can be installed correctly:

Ø  Please reserve enough space for installation.

Ø  Please avoid installing occasions strong vibration.

l  Illustration and installation position

Note: Radar antenna microwave pulse, have a certain emission angle. From the lower end of the antenna to be measured between the surface of the medium, and a transmitter shall be no obstruction in the region of the microwave beam radiation. Therefore, the installation should be avoided as far as possible shelter facilities, shall be carried out "false echo study" when necessary. Also note that when installing devices: the highest level measured shall enter blind; instrument must be connected to the earth, increasing the lightning protection measures; outdoor shade should be taken, rain measures.Kaidi Sensors radar level sensor supply for detecting-2

Note: Radar antenna microwave pulse, have a certain emission angle. From the lower end of the antenna to be measured between the surface of the medium, and a transmitter shall be no obstruction in the region of the microwave beam radiation. Therefore, the installation should be avoided as far as possible shelter facilities, shall be carried out "false echo study" when necessary. Also note that when installing devices: the highest level measured shall enter blind; instrument must be connected to the earth, increasing the lightning protection measures; outdoor shade should be taken, rain measures.


2. The Electrical  Connection

Power Supply voltage


RS485 /   Modbuspower supply   and Modbus signal lines separated respectively using a shielded cable, the   power supply voltage range of see technical data.
(4~20)mA/HART   (Two wire system)       The   power supply and the output current signal sharing a two core shield cable.   The supply voltage range see technical data. For intrinsically safe type must   be a safety barrier between the power supply and the instrument.



Connection mode

l  The RS485/Modbus wiring diagram as follows:

Kaidi Sensors radar level sensor supply for detecting-3

l  24V two wire wiring diagram as follows:

Kaidi Sensors radar level sensor supply for detecting-4

Protection grade

This instrument meets the protection grade IP66/67 requirements,  please ensure the waterproof cable sealing head.

Kaidi Sensors radar level sensor supply for detecting-5


How to install to meet the requirements of IP67:

Please make sure that the sealing head is not damaged.

Please make sure that the cable is not damaged.

Please make sure that the cable for use with electrical connection specification.

Cable into the electrical interface before its curved downward, ensure that the water will not flow into the shell, see the

Tighten the cable seal head, see the

Please electrical interface will not use blind plug tight, see the


3.   Structure  Size  (Unit: mm)

lThe Outer Covering:

Kaidi Sensors radar level sensor supply for detecting-6

l  Appearance  size:

908 : 

Kaidi Sensors radar level sensor supply for detecting-7

909 :

Kaidi Sensors radar level sensor supply for detecting-8

 Connection 

²  Standard bracket

²  With rain cover bracket

²  Thread G1½ "A connection

²  G1½ mounting base connection

Kaidi Sensors radar level sensor supply for detecting-9

4.   Technical   Parameters

The outer shell  
The seal between the shell and the shell cover                 Silicone rubber
Casing   window                                                                   Polycarbonate
The ground   terminal                                                           Stainless steel
The power supply voltage
Four wire   system(624) V DC / RS485    Modbus  / Power dissipation   90mW
Two wire   systemDC 24V /  4~20mA     / Power dissipation  0.75W
The cable parameters 
Cable entrance   / plug           1    M20xl.5 cable entrance

 1    blind plug
Terminal                               Conductor cross section1.0mm²  
Output parameters
The output signal                              RS485  Modbus    (6~24V  DC)
4~20mA /   Hart  Two  wire ( 24V DC)
Communication   protocol                  Modbus  control / HART
Resolution                                        1.6μA
Fault   signal                                       Constant current   output; 20. 5mA

22mA 

3.9mA
The integral   time                              (0 ~ 36) s,   adjustable
Blind   area                                 the ends of the   antenna
The maximum distance measurement      
90830 meters  
90970 meters  
 Microwave frequency                                              26GHz
The   measurement interval       about 1 second   (depending on the parameter settings)
Adjust the   time                         about 1 second   (depending on the parameter settings)
Display   resolution                   1 mm
Working storage and transportation temperature                          (-4070) 
Process temperature (the temperature of the antenna part   (-40100)
Pressure                                    Normal atmospheric   pressure
Seismic                                       Mechanical vibration   l0m/s², (10 ~ 150) Hz

Meter  Linearity

908 :


Emission angle                 Depending on the size of the antenna

-76mm                          12°

-96mm                          18°

Precision                          See chart


Kaidi Sensors radar level sensor supply for detecting-10

909 :


Emission angle                 Depending on the size of the antenna

-76mm                          12°

-96mm                          18°

-121mm                         6°

Precision                          See chart

Kaidi Sensors radar level sensor supply for detecting-11


Company Features
1. As a large producer of radar level sensor , Guangdong Kaidi Energy Technology Co., Ltd. is one of the very best in China.
2. The Kaidi Sensors Technology Center has been focusing on forward-looking technologies at home and abroad, with the aim of applying technology to the production process.
3. In our business sustainable development, we make plans to promote growth by investing in science and research, environmental organizations, and special group caring projects.
radar level sensor's structure is more compact and easy to be installed, so as to effectively reduce labor intensity and shorten operating time. This product features a proper fitting without any kind of discomfort
Guangdong Kaidi Energy Technology Co., Ltd. mainly assemble radar level sensor whose materials including radar level sensor. This product is a great helper of managing emergency situation
radar level sensor is a new type of radar level sensor made of advanced materials. This product is not easy to go out of shape
radar level sensor can not be competitive without the changing design of radar level sensor. This product is able to keep the skin dry and healthy
The results show that radar level sensor with radar level sensor material presents excellent performance. This product helps relieve users from bad odor problem
radar level sensor are the characteristics of radar level sensor. It is easy to put on and remove
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...