KAIDI digital radar level meter suppliers for work1

Company Advantages
1. The safety of KAIDI must be formally approved. It will be registered on the Electrical Equipment Safety Scheme (EESS) and comply with the requirements of the Electricity (Safety) Regulations. This product has been certified under CE and RoHS
2. An appropriate programme of quality control (QC) must be implemented in Guangdong Kaidi Energy Technology Co., Ltd.. This product can repeat the same measurement many times
3. This product has the required stiffness. Due to its mechanical properties, such as tensile strength and hardness, it can withstand different failure modes. This product can be used in many different industries such as food & beverage, water, energy, pharmaceutical, etc
4. The expected air permeability of this product is determined by the characteristics of the raw material, the geometric characteristics of the yarn used, the structural parameters of the woven fabric, the technology used to produce the fabric and the finishing process. It works stably under strong impact and vibration conditions
5. The creation of KAIDI has adopted many high-tech, mainly electronic information technology, automatic control technology, and micro-technology. It is able to quickly and effectively detect and respond to some types of input

Special 　　 sign: 　All PTFE antenna, strong corrosion resistance, no sanitary corners.

Should be used: 　 Suitable for highly corrosive environment and sanitary environment, simple process liquid measurement.

Maximum range: 　30m

Measurement accuracy: 　±10mm

Process connection: 　PTFE flange flange

Antenna material: 　PTFE

Process temperature: 　-40…150°C

Process pressure: 　-1.0…16bar

Frequency range: 　6GHz

Signal output: 　Two-wire system/four-wire system 4…20mA/HART

 

Detailed introduction:

GDRD52

Permit

P Standard type (non-explosion-proof)

I Intrinsically safe type (Exia IIC T6)

C Intrinsically safe type + marine license (Exia IIC T6)

G Intrinsically safe type + flameproof type (Exd [ia]ia IIC T6)

Antenna type/material/process temperature

B Plastic rod/PTFE/-40～+150℃

Container takeover length

A 50mm

B 100mm

C 150mm

D 200mm

E 250mm

F 300mm

X Special customization

Process connection

FC PTFE flange flange DN50 PN1.6 stainless steel 316L (GB/T9119-2000)

FD PTFE flange flange DN80 PN1.6 stainless steel 316L (GB/T9119-2000)

FE PTFE flange flange DN100 PN1.6 stainless steel 316L (GB/T9119-2000)

FK PTFE flange flange DN150 PN1.6 stainless steel 316L (GB/T9119-2000)

YP Special

Electronic components

B (4～20)mA/HART two-wire system

C (4～20)mA/(22.8～26.4)V DC/HART two-wire/four-wire system

D (198～242)V AC/HART four-wire system

Enclosure rating

A Aluminum/IP67

B Plastic/IP66

D Aluminum two-chamber/IP67

G Stainless steel 316L/IP67

Cable entry

M M20x1.5

N ½NPT

On-site display/programming

A belt

X without

Note: Intrinsically safe + marine license (Exia IIC T6) is limited to "A" or "B" electronic components and "G" type enclosure; intrinsically safe + flameproof type (Exd [ia]ia IIC T6) is limited to use "D" shell.

Company Features
1. As we continue to design and manufacture , Guangdong Kaidi Energy Technology Co., Ltd. has become a national market leader.
2. Over the years, we are keeping expand into foreign markets through an effective sales network. Currently, we have corporated with many customers from different countries like United States, Japan, Russia, and so on.
3. has been the driving force for Guangdong Kaidi Energy Technology Co., Ltd. since its establishment. Inquire!