With the development of modern industry, more and more industries need to measure and control the level of solid materials, such as cement, coal, powder, etc.. And in large dusty working conditions, traditional level meters are easily disturbed by dust, which leads to inaccurate measurement and affects production efficiency. Radar level meters, on the other hand, can work better by using special technology and materials to improve their ability to overcome dust interference.

In liquid level measurement, ultrasonic Level sensor is a kind of non-contact material level measuring instrument that is widely used. However, in practical application, as temperature, humidity, dust, chemical composition of the measured liquid and other factors will affect the measurement accuracy of the ultrasonic Level sensor wholesale to varying degrees, it is necessary to master the calibration methods of different errors caused by different factors to achieve accurate measurement.

Radar level meter is an advanced measuring instrument for solid materials, process vessels or strong dust prone to crystallization and condensation. It has the advantages of low maintenance, high performance, high accuracy, high reliability and long service life.

Brine tank level monitoring is an important means to evaluate whether the brine system of freezing project is operating normally. In the construction of freezing project, brine leakage accidents such as freezing pipe rupture are usually detected by observing the brine tank level, so brine tank level measurement is important.

As a supplier of radar level meter for many years, Guangdong Kaidi Energy Technology Co., Ltd. often receives many inquiries, among which the more frequently mentioned question is "Why should the radar level meter set the dielectric constant?" For this question, today's detailed answer.

Petrochemistry industry, referred to as petrochemical industry, is one of the key pillar industries in China. It mainly processes and sells crude oil and natural gas, such as diesel, gasoline, kerosene, paraffin, asphalt, plastics, rubber, chemicals, etc.

The installation position of the temperature primary point should be selected in a location where the medium temperature changes sensitively, and should not be selected near resistance components such as valves and welds, or at dead corners of the medium flow beam.

The installation method of temperature transmitter instruments (usually referred to as primary instruments including thermocouples, thermal resistors, bimetallic thermometers, local displays, etc.) can be divided into four types according to the fixed form: flange fixed installation; Fixed installation with threaded connection; The flange and threaded connection are fixed and installed together; Simple protective sleeve insertion installation.

Level measurement is often required in vessels with agitation in the chemical, pharmaceutical and food industries. Traditional level meters are prone to errors in stirred conditions, but radar level meters can break through this challenge. In this paper, we will introduce the measurement principle of radar level meter in stirred conditions and present two actual measurement cases.

How to troubleshoot and handle the malfunction of the Rotary Paddle level Switch? This is a necessary knowledge point for customers who have already used and want to use the Rotary Paddle level Switch.

The radio frequency admittance level switch, also known as the radio frequency admittance level meter, is a radio frequency admittance measurement technology developed based on the capacitance switch measurement technology. The capacitance value between the probe and the storage tank changes due to changes in the medium.

Level meter is a widely used liquid level measuring instrument​, which uses microwave signals to measure the height of the measured object with high accuracy and stability. In the process of using level meter, the choice of connection method has an important influence on the accuracy and safety of level measurement.