In the use of magnetic flap level meter will often encounter some complex working conditions, this time it is necessary to magnetic flap level meter manufacturers to make targeted improvements and enhance the production of the product in order to make it get good application.

Because of its unique advantages, electromagnetic flowmeter is widely used in chemical fiber, food, paper, sugar, mining and metallurgy, water supply and drainage, environmental protection, water conservancy, waterworks, iron and steel, petroleum, pharmaceuticals and other industrial fields, used to measure a variety of acid, alkali, salt solution, mud, pulp, pulp, pulp, coal water slurry, corn slurry, fiber slurry, grain slurry, milk of lime, sewage, cooling water, water supply and drainage, sa

Magnetic Flap Level Gauge is usually used to measure the level of liquid in a vessel. In order to prevent the magnetic flip-flop level gauge from freezing in the cold environment, the following methods can be taken

Radar level meter in the use of the process, the most commonly occurring failure is irregular jump, this situation occurs for many reasons, the natural solution is also quite a lot.

Level gauges are commonly used in industrial production to measure the height of a liquid or the volume of a liquid in a container.

Mass flow meter is through the vibration of the sensor to achieve the measurement, in order to prevent external interference, the instrument installation site can not have a large source of vibration, and take reinforcement measures to stabilize the instrument near the pipeline.

Liquid level meters make up a large percentage of wastewater treatment applications and are used in almost every aspect of the entire wastewater treatment process. In wastewater treatment, liquid levels need to be measured for wastewater, sludge, chemical solutions, and so on.

In industrial measurement technology, radar level meters are favored for their high accuracy and reliability. However, even such advanced equipment has its limitations - that is, the so-called “blind spot”. Today, we will be in-depth interpretation of this phenomenon, to unravel the mystery of the blind spot of the radar level meter.

Kaidi’s level indicator transmitter enables continuous level measurement with ultimate accuracy even during high temperatures and pressure and improves operational efficiencies of processes.

It works according to the principle of buoyancy and magnetic coupling. When the magnetic liquid level gauge in the measured vessel rises and falls, the float in the main tube of the magnetic flap level gauge rises and falls with it, and the permanent magnet inside the float is transferred to the field indicator through magnetic coupling to drive the red and white flip columns to turn over 180 °, and when the level rises, the flip columns turn from white to red, and when the level falls, the flip

Kaidi Sensors is one of the best level indicator manufacturers in flow meters and it offers flow instrumentation that is precise, certified, and high-performing.

Fluid flow through the pipeline throttle device, the formation of local contraction at the throttle, so that the flow rate increases, the static pressure decreases, so the formation of pressure drop, that is, the differential pressure, the media flow the larger the flow rate, before and after the throttle device produces a greater pressure difference, so the differential pressure flowmeter can be measured by measuring the pressure difference in order to measure the size of the fluid flow.