YH100 single-rod vibrating fork level switch is one of the Vibrating Fork Level Switch. It is not afraid of hanging materials or impact, has no material clamping problems, and has higher sensitivity. Its cylindrical single-rod structure determines its wider adaptability to industrial sites. It uses the "resonance" principle of the Vibrating Fork to generate vibration under the drive of the piezoelectric element. Only when the probe rod is surrounded by materials, the vibration amplitude decreases sharply, resulting in a switching action. Mainly used in material detection, interface detection, and material level detection.
➪The round and smooth single-rod probe can effectively prevent material clamping and sticking, and the working sensitivity can be stabilized when there are more materials hanging.
➪ It is not affected by the nature of the measured object, and can be used stably without adjustment after installation.
➪The stainless steel probe with piezoelectric element built into the rod body and thick tube wall is adopted, and the vibration absorbing tube is only 9mm long.
➪According to the different objects to be measured, the measurement sensitivity (L, M, H) can be adjusted, and the layered liquid level/powder body of different specific gravity can be selected to be measured.
➪Using 15A large-capacity contact relay switch, it can directly control the motor.
➪Compared with the anti-rotation type: no moving parts, sturdy probe is resistant to abrasion and material impact, and the sensitivity is adjustable.
➪ Compared with the capacitive type: it is not affected by the dielectric coefficient, and the surface is self-cleaning. Easy to use, sturdy and durable, no calibration required after installation.
Power supply | 220V/105V/24V AC/DC |
Power consumption | 2.5W |
Vibration frequency | 280Hz |
Relay contacts | Normally open normally closed node AC250V/DC30V |
Electrical connections | M16×1.5(¢8-¢10 cable) 5A |
Delay | Measure (vibration stop) 0.5 seconds, restore (stop vibration) 1 to 2 seconds |
Operating temperature | Probe part/-30℃~+200℃. Board part/-30℃~+70℃ |
Model | YH100 | |
Connection method | ||
F | Flange | |
S | Thread | |
T | Clamp | |
Wetted material | ||
4 | 304SUS | |
6 | 316SUS | |
T | PTFE | |
Probe length | ||
Standard length: 189mm | ||
L | Customized mm | |
Temperature | ||
N | -30℃~80℃ | |
T | -30℃~200℃ |
Please Send Us your Application details
Measuring range , medium, Installation method (flange, thread), Pressure range, Remote transmitter, Level alarm switch
More Model available for all appication, different termperture and pressure!
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist
Our technical team will check your specifications and make a best solution for you.