Español 
pусский 
العربية 
Português 
Kaidi KD YELJZ Standard Long Diameter Nozzle Flowmeter Integrated Differential Pressure Throttling Device High Temperature Steam Nozzle Flowmeter
The LLQ type gas waist wheel flow meter is a new generation product developed by our company based on many years of experience and using a number of innovative technologies. This product is a high-precision, high-reliability, wide-range, and low-starting flow The volumetric gas meter can directly measure the volumetric flow and total volume of the gas under working conditions, or by configuring a volume corrector to measure the temperature, pressure, volumetric flow and total volume of the gas under standard conditions, and optional DTU module to achieve wireless Far pass. It has been widely used in urban gas and industrial gas flow measurement and detection. It is an ideal instrument for users to achieve high-precision and high-reliability measurement.
● High precision and good repeatability. The internal rotor has undergone precision machining and balance testing, non-contact rotation, and good oil lubrication to ensure that the accuracy of the flow meter remains unchanged.
● There is no need for straight pipes before and after the flow meter, so it can be installed in a narrow environment.
● The starting flow is small and the range ratio is wide, which is suitable for gas flow measurement with large changes in the metering load.
● The instrument has pulse signal output, 4-20mA analog signal output, RS485 (MODBUS-RTU protocol) communication output; at the same time, it also has an IC card signal output, which can be used in conjunction with the IC card prepayment system to facilitate trade settlement.
● The use of the new fourth-generation tunnel magnetoresistive technology signal sensor (TMR) greatly enhances the instrument's anti-electromagnetic interference capability.
●Reliable electromagnetic compatibility design, good anti-interference performance, high reliability, and meet the electromagnetic compatibility experiment requirements of JJG633-2005 standard.
● With low power consumption design, it can be powered by a lithium battery, which can be used continuously for more than 2 years; at the same time, it can also be an external power supply.
● The dedicated LCD display is intuitive and convenient to read. It can display instantaneous flow under standard conditions, instantaneous flow under working conditions, cumulative flow under standard conditions, and the temperature and pressure of the measured medium at the same time.
| Executive standard | Measurement of gas flow in closed pipelines---turbine flow meter (CG/T18940-2003) |
| Accuracy grade | ±1.5%R (±1%R requires special characteristics) |
| Range ratio | 1:10~1:30 |
| Instrument material | Body: 304 stainless steel or cast aluminum Impeller: high-quality aluminum alloy Converter: cast aluminum |
| Conditions of Use | Ambient temperature: -25~+80℃; relative humidity: 5%~95%; medium temperature: -20~+60℃; atmospheric pressure: 86kPa~106kPa |
| Protection grade | IP65 |
| Power supply | A. External power supply: +24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc. B. Internal power supply: 1 set of 3.6VDC lithium battery |
| Communication output | RS485 communication |
| Real-time recording | Daily record, fixed time interval record |
| Signal interface | Internal thread M20X1.5 or others |
| Signal output | Pulse signal, 4-20mA current signal, control signal |
| Explosion-proof grade | Exia IIC T4 Ga |
| Model specification | Nominal diameter DN mm | Range ratio | Flow range m³/h | Starting flow (m³/h) | Pressure loss at Qmax kPa | Meter factor | Maximum pressure loss (kPa) | Nominal pressure Mpa | Material |
| LLQ-16 | 25 | 20:1 | 0.8-16 | 0.04 | 0.1 | 7633.37 | ＜1.2 ＜2.0 | 1.6 2.5 | |
| LLQ-25 | 40 | 25:1:00 | 1-25 | 0.07 | 0.1 | 4694.65 | |||
| LLQ-40 | 40 | 40:1:00 | 1-40 | 0.07 | 0.14 | 3892.31 | |||
| LLQ-65 | 50 | 65:1:00 | 1-65 | 0.1 | 0.1 | 1584.24 | |||
| LLQ-85 | 50 | 70:1:00 | 1.1-85 | 0.1 | 0.14 | 1584.24 | |||
| LLQ-100 | 80 | 70:1:00 | 1.5-100 | 0.1 | 0.11 | 987.581 | |||
| LLQ-150 | 80 | 120:1:00 | 1.2-150 | 0.12 | 0.15 | 730.785 | |||
| LLQ-200 | 80 | 70:1:00 | 3-200 | 0.15 | 0.18 | 479.837 | |||
| LLQ-250 | 100 | 80:1:00 | 3-250 | 0.11 | 0.18 | 306.804 | ＜1.2 | 1.6 | |
| LLQ-300 | 100 | 120:1:00 | 2.5-300 | 0.11 | 0.13 | 306.804 | |||
| LLQ-450 | 100 | 110:1:00 | 4-450 | 0.1 | 0.2 | 231.350X2 | |||
| LLQ-500 | 100 | 125:1:00 | 4-500 | 0.1 | 0.2 | ||||
| LLQ-650 | 150 | 80:1:00 | 8-650 | 0.65 | 0.35 | 86.7083 | Aluminum, cast iron | ||
| LLQ-1000 | 150 | 90:1:00 | 11-1000 | 0.76 | 0.45 | 61.899 | Aluminum, cast iron | ||
| LLQ-1600 | 200 | 64:1:00 | 25-1600 | 1.2 | 0.5 | 50.2425 | Aluminum, cast iron | ||
| LLQ-3000 | 250 | 40:1:00 | 75-3000 | 8 | 0.45 | Aluminum, cast iron |
Please Send Us your Application details
Measuring range , medium, Installation method (flange, thread), Pressure range, Remote transmitter, Level alarm switch
More Model available for all appication, different termperture and pressure!
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist
Our technical team will check your specifications and make a best solution for you.