Kaidi Sensors  >  AI - Page Sitemap  >  top radar level transmitter suppliers for detecting
top radar level transmitter suppliers for detecting

top radar level transmitter suppliers for detecting
  • top radar level transmitter suppliers for detecting
  • top radar level transmitter suppliers for detecting
  • top radar level transmitter suppliers for detecting
  • top radar level transmitter suppliers for detecting
  • top radar level transmitter suppliers for detecting
  • top radar level transmitter suppliers for detecting
  • top radar level transmitter suppliers for detecting
  • top radar level transmitter suppliers for detecting
  • top radar level transmitter suppliers for detecting
  • top radar level transmitter suppliers for detecting

top radar level transmitter suppliers for detecting

PRODUCT...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


PRODUCT OVERVIEW

This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 10 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.


top radar level transmitter suppliers for detecting-1


THE PRODUCT PRINCIPLE

Radar level transmitter antenna microwave pulse is narrow, the downward transmission antenna. Microwave exposure to the medium surface is reflected back again by the antenna system receives, sends the signal to the electronic circuit automatically converted into level signals (because the microwave propagation speed, electromagnetic wave to reach the target and the reflected back to the receiver this time is almost instantaneous).


top radar level transmitter suppliers for detecting-2

Datum measurement:  Screw thread bottom or the sealing surface of the flange.

Note: Make sure the radar level meter the highest level cannot enter the measuring blind area (Figure D shown below).


PROTECTION GFEATURES

top radar level transmitter suppliers for detecting-3

Ø Small antenna size, easy to install; Non-contact radar, no wear, no pollution.

Ø Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure

changes.

Ø Serious dust environment on the high level meter work has little effect.

Ø A shorter wavelength, the reflection of solid surface inclination is better.

Ø Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.

Ø The measuring range is smaller, for a measurement will yield good results.

Ø High signal-to-noise ratio, the level fluctuation state can obtain better performance.

Ø High frequency, measurement of solid and low dielectric constant of the best choice.


PRODUCT SPECIFICATION


top radar level transmitter suppliers for detecting-4


APPEARANCE OF SIZE

top radar level transmitter suppliers for detecting-5


TECHNICAL PARAMETERS


top radar level transmitter suppliers for detecting-6


top radar level transmitter suppliers for detecting-7

top radar level transmitter suppliers for detecting-8

top radar level transmitter suppliers for detecting-9

INSTALLATION REQUIREMENTS

top radar level transmitter suppliers for detecting-10

top radar level transmitter suppliers for detecting-11

top radar level transmitter suppliers for detecting-12

top radar level transmitter suppliers for detecting-13



Removal of the edge, or flash, from a Kaidi Sensors radar level transmitter can be accomplished in a number of ways including manual tear trimming, cryogenic processing, tumbling precision grinding. With a series of sensitive input selection, it features high sound quality
Kaidi Sensors radar level transmitter has achieved quality management system certification in accordance with both domestic and international standards in regards to porcelain manufacture. It has the advantage of excellent acoustic signal conversion
During the designing stage of Kaidi Sensors radar level transmitter, sketches and CAD technique are used by the designers who strive to create a product with the function of foot orthopedic. It has the advantage of excellent acoustic signal conversion
Kaidi Sensors [拓展关键词 is superior in raw materials. Inferior materials are totally rejected into the factory, which ensures the luminous efficiency.
In the manufacture of Kaidi Sensors radar level transmitter, a range of techniques have been used, from CAD design, 3D imaging, model manufacturing, to final assembly. The sound of this product is loud enough for outside usage
Long service life absolutely manifests its superior performance. This product is ultra-efficient, guaranteeing a clean, undistorted signal to the speakers
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...