KAIDI turbine flow meter manufacturers for industrial

Company Advantages
1. KAIDI magnetic water flow meter has passed various kinds of tests according to international lighting standards. In some cases, some even tougher standards such as vibration test are adopted to make sure that it is going to last.
2. The product has good gas permeability and water permeability. The surface is treated with a coating film that changes the product's hygroscopicity.
3. The product is in high demand at home and abroad thanks to its considerable economic benefits.

A magnetic flow meter (mag meter, electromagnetic flow meter) is a transducer that measures fluid flow by the voltage induced across the liquid by its flow through a magnetic field. A magnetic field is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines. The physical principle at work is electromagnetic induction. The magnetic flow meter requires a conducting fluid, for example, water that contains ions, and an electrical insulating pipe surface, for example, a rubber-lined steel tube.

If the magnetic field direction were constant, electrochemical and other effects at the electrodes would make the potential difference difficult to distinguish from the fluid flow induced potential difference. To mitigate this in modern magnetic flowmeters, the magnetic field is constantly reversed, cancelling out the electrochemical potential difference, which does not change direction with the magnetic field. This however prevents the use of permanent magnets for magnetic flowmeters.

Specifications

- Size: DN10~DN600 (PTFE) ; DN40~DN1200 (NBR)

- Standard pressure: PN1.0MPa~40MPa;

- Accuracy: ±0.5%~±1.0%;

- Supply power: 85 to 250VAC (45 to 63Hz), 16 to 36VDC;

- Signal output: Current Output: 4~20mA;

- Frequency Output: 0~5000Hz with photoelectric isolation;

- Pulse Output: 0.001~1.000m3/cp, 0.001~1.000 Ltr/cp, 0.001~1.000USG/cp,0.001~1.000 UKG/cp;

- Alarm Output: Upper Alarm-ALMH, Lower Alarm-ALML with photoelectric isolation;

- Communications: RS-232 without galvanic isolation, RS-485 with Galvanic isolation;

- Ambient temperature: -10~60;

- Relative humidity: ≤85%RH;

- Atmospheric pressure: 86KPa~106KPa;

- Applicable Fluid: electrically conducting liquid;

- Fluid temperature:-25~ +65 and -25~ +180;

- Electrical conductivity: 5us/cm.

Company Features
1. The performance of Guangdong Kaidi Energy Technology Co., Ltd. has surpassed many other suppliers of turbine flow meter in today's market. The company is now gradually developing into a leader in this field.
2. The factory runs effectively under the guidelines of the production management system. This system, rather than focusing on mistakes after the fact, emphasizes preventive measures, which improve overall production efficiency.
3. Our goal is to be one of the most customer preferred manufacturers and establish a position of global leadership. Through raising customer satisfaction levels, we aim to bring out the best results to as many of our customers as possible. We work closely with clients to find a perfect combination of products and services that provide a comprehensive balance of performance and pricing effectiveness.