custom pressure transmitter suppliers for transportation

Brief introduction

A pressure transducer, often called a pressure transmitter, is a transducer that converts pressure into an analog electrical signal. Although there are various types of pressure transducers, one of the most common is the strain-gage base transducer.

The conversion of pressure into an electrical signal is achieved by the physical deformation of strain gages which are bonded into the diaphragm of the pressure transducer and wired into a wheatstone bridge configuration. Pressure applied to the pressure transducer produces a deflection of the diaphragm which introduces strain to the gages. The strain will produce an electrical resistance change proportional to the pressure.

Typical Specifications

Medium	Gas, liquid, oil
Measuring range	Gauge pressure(G)---Max(0 ~ 60)MPa, Min(0 ~ 0.5)KPa
	Absolute Pressure(A)---Max(0 ~ 60)MPa, min (0 ~ 5)KPa
	Negative pressure(B)--- Max (-100KPa ~ 60)MPa, Min(-0.2 ~ 0.2 )KPa
Accuracy	0.25, 0.5
Overload capability	2-3 times of Measuring range
Long-term stability	<0.2%FS/yr, <0.5%FS/yr
Power supply	15 ~ 36 VDC(rated 24VDC)
Output	(4 ~ 20)mA (2/3/4 line), (0 ~ 10/20)mA, (0 ~ 5)V, (1 ~ 5)V, (0 ~ 10)V
Working temperature	-40 ~ 80°C Temperature Compensation：-20 ~ 70 °C
Process connection	M20×1.5or customized
Weather proof	IP65
Optional radiator	Up to 300°C

t******t

Kaidi Sensors 5v pressure transducer meets domestic standards for mechanical devices. It is manufactured in line with requirements for different aspects of GB/T and JB/T.

y******p

Kaidi Sensors pressure transmitter has been tested for many times. These tests have been conducted in terms of power, efficiency, service life, strength, stiffness, anti-friction, wear and tear, vibration stability, etc.

w******y

Kaidi Sensors pressure transmitter is the outcome of various disciplinary knowledge. It is developed under the guideline of mechanical engineering, applied mechanics, power machinery, CNC technology, and so on.

p******b

The production of Kaidi Sensors pressure transmitter involves the following major steps. It has to go through stamping, coating, painting, drying, and polishing by respective machines.

t******i

Kaidi Sensors 5v pressure transducer is an inter infiltration result of various technologies. It is developed by the R&D team who adopts the mechanical technique, detection and sensing technology, automatic control technology, and servo drive technology.

e******s

This product is hard yet it is typically smooth and pleasantly cool to touch. Its finish is made of high-quality ceramic glaze which is finely fired.

Product Message

*Name

Phone

*E-mail

*Content

KAIDI pressure transmitter suppliers for transportation