Kaidi KD YH2631 RF Admittance Continuous Level Meter Accuracy ±0.5% for liquids

The electronic circuit of YH2631 product adopts an anti-adhesion circuit, which can eliminate the influence of adhering and false level signals hanging around the probe while detecting the real level. It is an excellent level transmitter for measuring liquid, solid, interface and foam. It can work under extreme process conditions, and its temperature ranges from -184 to 260°C and pressure vacuum (FV) to 525 bar. It has excellent performance and a wide range of applications.

The electronic circuit of YH2631 product adopts an anti-adhesion circuit, which can eliminate the influence of adhering and false level signals hanging around the probe while detecting the real level. It is an excellent level transmitter for measuring liquid, solid, interface and foam. It can work under extreme process conditions, and its temperature ranges from -184 to 260°C and pressure vacuum (FV) to 525 bar. It has excellent performance and a wide range of applications.

▶ Patented effective shielding technology;

▶ Simple button adjustment;

▶ Frequency inversion technology provides higher resolution;

▶ 2-wire loop power supply 4-20, 20-4mA measuring signal;

▶ High temperature and high pressure resistance;

▶ The product can detect any process materials, such as: refined oil, gasoline, conductive mud, etc.;

▶This product is matched with LC86X type sensing probe. LC863 is a general-purpose probe, LC890 is a flat probe, and a steel rope probe is also available. It has a Teflon and stainless steel structure. It can be used in high temperature, high pressure environments, liquids, powders, large solid blocks and corrosive objects.

➼ Power supply: 24VDC

➼ Maximum working current: MAX100mA

➼ 4～20mA output impedance: MAX750Ω

➼ Delay time: 0～30" seconds continuously adjustable

➼ Accuracy: ±0.5%

➼ Material temperature: -184℃～260℃

➼ RS485 communication port/high and low position/digital display: yes

➼ Adjustment method: button (digital adjustment)

➼ Thread size of outlet hole (waterproof connector for cable): M20*1.5 (diameter 8～12mm)

➼ Circuit temperature resistance: -40℃～80℃

➼ Sensitivity: 0.5pf

➼ Power failure protection: high and low mode, adjustable on site

➼ Housing: IP65, heavy cast aluminum housing

①LCP601: Single probe

Used in metal containers, can detect most liquids, the probe is Teflon Coating, anti-corrosion. It is recommended to detect conductive liquids.

② LCW609: Flexible single probe

The use occasions are the same as above. It is recommended to be used in applications with a length of more than 4 meters. If there is agitation, it is recommended to fix the bottom.

③ LCP607: Steel shaft probe

Detect low-viscosity liquids. Such as gasoline. (Recommended for mixing occasions)

④ LCP627: Flange type double probe

Applicable to various containers, and can detect non-corrosive liquids and powders to 316 stainless steel.

⑤ LCP628: flange type double probe

It is especially recommended for the detection of strong acids and bases. All contact surfaces are Teflon surfaces.

⑥ LCW616: Flexible dual probe (all Teflon)

It is recommended to detect strong acids and strong bases. Length greater than 3.5m 

⑦LCW615: Flexible dual probe

It is recommended that the length exceeds 3.5m, which can be used to detect coal or cement.

⑧LCW613: Flexible dual probe

Suitable for various occasions, it is recommended to detect pure water, industrial wastewater, etc. or pure water water-based solutions.