Kaidi KD YH 2088 Submersible Liquid Level Transmitter anti-impact and anti-lightning design

The YH2088 submersible liquid level transmitter uses a high-performance diffused silicon pressure sensor as the measuring element. After a high-reliability amplifying circuit and precise temperature compensation, the gauge pressure or absolute pressure of the measured medium is converted into a standard voltage or current. Signal. This product is small in size and easy to use and install. It can measure the height of the liquid level from the end of the transmitter to the liquid surface directly by putting it in the water.

1. Using advanced circuit processing technology, stable performance and high sensitivity;

2. A variety of ranges, up to 200m (water column pressure) can be measured;

3. 316L stainless steel isolation diaphragm is used, which is suitable for a variety of measuring media;

4. Flexible configuration, different configurations can be selected according to needs;

5. Integral type and split type are optional;

6. Reverse polarity and over-voltage protection;

7. Anti-impact and anti-lightning design;

8. Laser resistance adjustment temperature compensation, zero point and range can be adjusted on site;

9. Wide range of corrosion resistance, suitable for multi-pass media;

10. Strong overload and anti-interference ability, stable performance

Industrial site liquid level measurement and control, urban water supply and sewage treatment, petroleum, chemical industry, power plants, hydrological monitoring, reservoirs, dams, hydropower construction and other fields of liquid level measurement

♢Measurement form and range: 0～1～200mH2O;

♢Allowed overload: 2 times full scale pressure;

♢Working temperature: -20～80℃, temperature compensation: -10～70℃, storage temperature: -40～80℃;

♢Accuracy: 0.25% FS (typical) 0.5% FS (maximum);

♢Stability error: 0.25% FS (typical), 0.5% FS (maximum);

♢Temperature drift coefficient: 0.01%FS (typical, the range is not less than 5mH2O) 0.03%FS (typical, the range is less than 5mH2O);

♢Output signal: (4～20) mA (two/three wire system), (0～10/20) mA, (0～5)V, (1-5)V, (0～10)V;

♢Power supply: 15～36VDC (rated voltage 24VDC);

♢Load : current output type＜(U-15V)/0.02A, current output type＞5K;

♢Housing material: alloy aluminum:

♢Diaphragm: 316L stainless steel:

♢Cable: dedicated waterproof and breathable cable;

♢Mechanical protection: IP68 (pressure sensor part), IP65 (junction box transmitter part)