Español 
pусский 
العربية 
Português 
kaidi KD UZC high temperature and high pressure magnetic level gauge
UZC-E magnetic sensitive electronic two-color level gauge is made of high-quality stainless steel and imported electronic components. The display part adopts high-brightness LED two-color light-emitting tube to form a columnar display. The red and green changes of the LED light beam display the measured liquid level. High and low. The display brightness is high, the visual distance is long, the ruler is clear, the display angle is large, the brightness is adjustable, and the product is more visualized and intelligent. The whole process of measurement is rain-proof, anti-corrosion, high temperature resistance, high pressure, anti-leakage, no blind spots, eye-catching display, intuitive readings, and wide measurement range. It is suitable for various towers, tanks, tanks, spherical vessels, boilers and other equipment The liquid level is continuously measured. The optional liquid level alarm switch can realize the upper and lower limit alarm and control of the liquid level.
| Measuring range | 300- 15000mm | Rated temperature | ≤450℃ |
| Measurement accuracy | ±5mm | Medium viscosity | ≤0.02Pa.S . |
| Nominal pressure | ≤42MPa | Following speed | ≤0.08m/s |
| Medium density | ≥0.35g/cm3 | Transmission output | Two-wire 4-20mA, DC600Ω load |
| Medium density difference | ≥0.03g/cm3 (measurement interface) | Connection flange size | HG/T20592-20635-2009, DN20, PN2.5 If other flanges are used, please indicate when ordering |
| Model | illustrate | |||
| UZ | Kaidi Magnetic Level Gauge | |||
| Type of installation | C | Side loading | D | Top loading |
| Panel type | A1 | -40-80℃ normal temperature | Z1 | -190~-20℃ Vacuum |
| A2 | 80-180℃ medium temperature | Z2 | -20-180℃ Vacuum | |
| A3 | 180-350℃ high temperature | Z3 | Vacuum at 180-350℃ | |
| A4 | 350-450℃ ultra high temperature | E | -40℃-450℃ magnetic sensitivity | |
| Pressure Rating (MPa) | 1 | PN1.0 | 2 | CL150LB |
| 1.6 | PN1.6 | 5 | CL300LB | |
| 2.5 | PN2.5 | 11 | CL600LB | |
| 4 | PN4.0 | 15 | CL900LB | |
| 6.3 | PN6.3 | 26 | CL1500LB | |
| 10 | PN10.0 | 42 | CL2500LB | |
| 16 | PN16.0 | |||
| Range-Density | Range mm-density g/cm³ | |||
| Flange Material | P | 304 | PF | 304 lined with fluorine |
| PL | 316L | C | Carbon steel | |
| PP | PP | Ti | titanium | |
| Flange Diameter | 15 | Side mounted DN15 | 50 | Top loading DN50 |
| 20 | Side mounted DN20 | 65 | Top loading DN65 | |
| 25 | Side mounted DN25 | 80 | Top loading DN80 | |
| 32 | Side mounted DN32 | 100 | Top loading DN100 | |
| 40 | Side mounted DN40 | 125 | Top loading DN125 | |
| 50 | Side mounted DN50 | 150 | Top loading DN150 | |
| 65 | Side mounted DN65 | 200 | Top loading DN200 | |
| 80 | Side mounted DN80 | 250 | Top loading DN250 | |
| Flange sealing surface | Omit | Raised face | FM | Concave |
| F | Convex | FF | Full plane | |
| Tube material | P | 304 | P1 | 321 |
| PL | 316L | P4 | 304L | |
| PF | 304 lined with fluorine | Ti | titanium | |
| PP | PP | |||
| Insulation/anti-frost | Omit | No | ||
| C | Type C insulation pipe (recommended) | |||
| T1 | Set vacuum insulation | |||
| T2 | Jacket insulation | |||
| D1 | 40-90 constant temperature electric heating | |||
| D2 | 120°C temperature control adjustable electric heating | |||
| S1 | Anti-frost below -40°C | |||
| S2 | -40~-20℃ anti-frost | |||
| Accessories | Y | Remote transmission level gauge | ||
| K | Alarm switch | |||
More Model available for all appication, different termperture and pressure!
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist
Our technical team will check your specifications and make a best solution for you.