UQK (float level controller is suitable for controlling and alarming the liquid level or boundary level of media in various open or pressurized vessels in the production process of petroleum, chemical, electric power, paper and food industries.
UQK type float level controller is a two-digit level meter, which is composed of float part and contact part. When the liquid level changes, the float changes, which causes the magnet at the other end of the ball rod to swing up and down. According to the principle of magnetic steel repelling each other, the magnet installed in the contact part will swing backwards, and the moving contact will be connected or disconnected between the static contact 1-1 and 2-2, so as to control the alarm signal alarm or start and stop the electric pump. According to the structure of the different can be divided into ordinary type and self-checking type. UQK(S)-105 type float level controller can be operated inside the lead pipe of the tank to adapt to the requirements of internal floating top tank.
Contact capacity AC200VA, DC50W (Intrinsically safe type only for 24V) Supply voltage AC220V, DC24V
Allowable current AC1A, DC2A Contact form SPDT (one normally open, one normally closed)
Ambient temperature -40℃~+80℃ Operating temperature -40℃~+135℃
Medium density ≥0.45g/cm3 Liquid connection material 304, 316L or according to user requirements
Connection flange HG/T20592-2009,HG/T20615-2009 or as required by the user Explosion-proof type ExdⅡBT4, intrinsically safe ExiaⅡCT4
Power inlet M20×1.5(internal thread) or according to customer's requirement Protection grade IP67
Technical parameters of each model
Model number
Nominal diameter (DN)
Nominal pressure (MPa)
Action limit (mm)
Adjustment method
Installation form
UQK(S)-101
DN80
≤4.0MPa
10
Non-adjustable
Horizontal side mounted
UQK(S)-1011
60
UQK(S)-1012
40
Vertical
UQK(S)-102
45~550
Adjustable in steps
Horizontal side mounted
UQK(S)-103
10~1000
Steplessly adjustable
Vertical
UQK(S)-104
DN40
10
Non-adjustable
Horizontal side mounted
UQK(S)-105
DN100
10
Non-adjustable
Horizontal side mount
Classification | encoding rules | illustrate | ||
series | UQK | Float level controller | ||
Installation form | C | Side loading | ||
D | Top loading | |||
Pressure Level | 1 | PN10 | 2 | CL150LB |
1.6 | PN16 | 5 | CL300LB | |
2.5 | PN25 | 11 | CL600LB | |
4 | PN40 | 15 | CL900LB | |
6.3 | PN63 | 26 | CL1500LB | |
10 | PN100 | |||
16 | PN160 | |||
-Center distance * Density- | -*-*- | Center distance mm Density g/cm3 | * Arabic numerals | |
Top flange material | P | 304 | ||
PL | 316L | |||
P1 | 321 | |||
Float material | P | 304 | ||
PL | 316L | |||
Ti | titanium | |||
Explosion-proof form | Omit | No explosion-proof requirements | ||
b | Flameproof | |||
Attachment | Omit | No accessories | ||
W | Outer pontoon | Side-mounted | ||
D | Guide tube | Top-mounted | ||
Outer float material | C | Carbon steel | ||
P | 304 | |||
PL | 316L | |||
Ti | titanium | |||
Flange specification | * | Flange diameter | 20、25、32、40、50、65、80、100 | |
Sealing surface | Omit | Raised face | Suitable for pressure below 10MPa | |
FF | Full plane | Suitable for atmospheric pressure | ||
M | Convex | Suitable for matching with concave surface | ||
FM | Concave | Suitable for matching with convex surface | ||
RJ | Ring connection surface | Suitable for high pressure |
More Model available for all appication, different termperture and pressure!
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist
Our technical team will check your specifications and make a best solution for you.