KAIDI best guided wave radar level transmitter suppliers for transportation

Company Advantages
1. The main tests are carried out when testing KAIDI . These tests include adhesion tests, color fastness tests, assembly tests, and adhesion tests for signs and labels. With a simple structure, it is perfectly good for demanding industrial applications
2. It has endless potential for development. This product features very low no-load losses
3. The offered product is equipped with a long service life and has reliable functions. This product is not susceptible to cracks
4. The product meets up with international standards for quality and you can be assured of its performance and durability. This product is characterized by excellent temperature stability
5. The high quality assurance of this product refers to the profession of our QC team. It works stably under strong impact and vibration conditions

PRODUCT OVERVIEW

This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 10 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.

THE PRODUCT PRINCIPLE

Radar level transmitter antenna microwave pulse is narrow, the downward transmission antenna. Microwave exposure to the medium surface is reflected back again by the antenna system receives, sends the signal to the electronic circuit automatically converted into level signals (because the microwave propagation speed, electromagnetic wave to reach the target and the reflected back to the receiver this time is almost instantaneous).

Datum measurement:  Screw thread bottom or the sealing surface of the flange.

Note: Make sure the radar level meter the highest level cannot enter the measuring blind area (Figure D shown below).

PROTECTION GFEATURES

Ø Small antenna size, easy to install; Non-contact radar, no wear, no pollution.

Ø Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure

changes.

Ø Serious dust environment on the high level meter work has little effect.

Ø A shorter wavelength, the reflection of solid surface inclination is better.

Ø Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.

Ø The measuring range is smaller, for a measurement will yield good results.

Ø High signal-to-noise ratio, the level fluctuation state can obtain better performance.

Ø High frequency, measurement of solid and low dielectric constant of the best choice.

PRODUCT SPECIFICATION

APPEARANCE OF SIZE

TECHNICAL PARAMETERS

INSTALLATION REQUIREMENTS

Company Features
1. Our factory has imported a series of advanced production facilities that can ensure constant and steady production. This means that thousands of products can be made in astonishingly short periods of time.
2. KAIDI now always holds the firm idea that customer satisfaction is in the first place. Check now!