high-quality guided wave radar level transmitter for business for work

Company Advantages
1. Sophisticated manufacturing techs are used in KAIDI . The product is done under the support of 2D/3D and CAD design techs, CAM machining tech, Gait balance analysis tech, and so on. There is little variation between its measuring values
2. The product has a broad application future because of its remarkable economic benefits. This product consumes little energy thanks to its energy-saving technology
3. The product has a smooth surface. Honed or polished under advanced machines, it achieves a beautiful surface without any burrs or defections. Due to its corrosive coatings, this product is highly rust-proof
4. The product has a deodorant function. It is manufactured with advanced deodorization technology combining with a delicate formula that aims to eliminate odor. This product has a wide range of operating temperatures

PRODUCT OVERVIEW

As a result of advanced microprocessor and unique choDiscovery echo processing technology, guided wave radar level meter can be used in a variety of complex conditions.

Because of the type of process connections and detection components, making 70X Series Guided Wave Radar Level Meter is suitable for a variety of complex conditions and applications. Such as: high temperature, high pressure and low dielectric constant media.

Pulsed work, guided wave radar level instruments transmit power is very low, can be installed in a variety of metals, non-metallic container, no harm to humans and the environment.

THE PRODUCT PRINCIPLE

High-frequency microwave pulses issued by the guided wave radar propagate along detection components (steel cable or steel rod), met the media to be measured, since the dielectric constant of the mutation, cause reflections, a portion of the pulse energy is reflected back. Transmit pulse and the reflected pulse is proportional to the distance and the time interval measured media.

Note: In order to ensure the accuracy of level measurement, the material should be located between the top and bottom of the blind the blind.

PROTECTION GFEATURES

Ø Small antenna size, easy to install; Non-contact radar, no wear, no pollution.

Ø Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure

changes.

Ø Serious dust environment on the high level meter work has little effect.

Ø A shorter wavelength, the reflection of solid surface inclination is better.

Ø Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.

Ø The measuring range is smaller, for a measurement will yield good results.

Ø High signal-to-noise ratio, the level fluctuation state can obtain better performance.

Ø High frequency, measurement of solid and low dielectric constant of the best choice.

PRODUCT SPECIFICATION

APPEARANCE OF SIZE

TECHNICAL PARAMETERS

 

INSTALLATION REQUIREMENTS

Within the measurement range, determined not to come into contact with the cable or rod internal obstacles, Therefore, the installation should be avoided as far as possible the tank facilities, such as: human ladder, limit switches, heating devices, stand etc. Also note that the cable or rod may not intersect with the material during feeding.

Also note that when installing the meter:Highest Level measurement can not enter into the blind; Must be maintained between the instrument and the tank wall a certain distance; When the meter is installed, try to stick with cable or perpendicular to the surface of the measured medium. Meter installation in hazardous areas must comply with state regulations explosion hazardous installation area. Intrinsically safe instrument requires the use of shell with aluminum. Intrinsically safe instrument can be installed in explosion-proof requirements of the occasion, the instrument must be connected to the earth.

 The following guidelines apply to the installation of the cable and the rod radar level measuring solid powder or liquid.

 

Company Features
1. As a leading guided wave radar level transmitter manufacturer, Guangdong Kaidi Energy Technology Co., Ltd. is a pioneer in the industry.
2. KAIDI now has mastered the highly technical methods to offer higher-quality radar level sensor .
3. We aim to make our portfolio 'trusted, quality, leadership brands'. We are working to achieve success by providing high-quality goods and services that are consistent from the beginning till the end.