top liquid level meter supply for industrial

Special features: 　Various patented antennas, anti-condensation, crystallization, hanging material, dust, beam concentration.

Should be used: 　 applied to the measurement of solid material level with short range.

Maximum range: 　15m

Measurement accuracy: 　±10mm

Antenna material: 　(T type) stainless steel 316L horn/PTFE vibrator

　　　　　　(V type) stainless steel 316L/PTFE vibrator

　　　　　　(W type) stainless steel 316L/PTFE vibrator

Antenna structure: 　 (T type) pointed cone vibrator, poor anti-condensation

　　　　　　(V type) cone vibrator, anti-condensation

　　　　　　 (W type) parabolic antenna, 4 degree opening angle

Process temperature: 　(T type)(-40～200)°C

　　　　　　(V type)(-40～200)°C

　　　　　　(W type)(-40～200)°C　

Process pressure: 　(T type)(-0.1～4)MPa

　　　　　　(V type)(-0.1～0.3)MPa

　　　　　　(W type)(-0.1～4)MPa

Frequency range: 　26GHz

Signal output: 　(4～20)mA/HART

Electric source: 　 four-wire system

Detailed introduction:

GDRD59

Permit

P Standard type (non-explosion-proof)

I Intrinsically safe type (Exia IIC T6)

G Intrinsically safe type + flameproof type (Exd [ia]ia IIC T6)

Antenna type/material

K (S type) horn antenna Φ98mm/PP/with PTFE cover

L (S type) horn antenna Φ98mm (extended)/PP/PTFE cover

X Special customization

Process connection/material

GB (G) thread G1½A/PP

GX special customization

Flange matching/material

HA (L)DN100 flange/PP

HD (N)DN100 universal joint flange/PP

GX special customization

Sealing/process temperature

2 Viton(-60～80)℃

Electronic components

B (4～20)mA/HART two-wire system

C (4～20)mA/(22.8～26.4)V DC /HART two-wire/four-wire system

D (198～242)V AC/HART four-wire system

Enclosure rating

A Aluminum/IP67

B Plastic/IP66

D Aluminum two-chamber/IP67

Cable entry

M M20x1.5

N ½NPT

On-site display/programming

A belt

X without

Note: Intrinsically safe type (Exia IIC T6) is limited to "B" electronic components and "A" type casing; intrinsically safe + flameproof type (Exd [ia]ia IIC T6)

Only use "D" electronic components and "D" shell; standard flange size refers to GB/T9119-2000 PN1.6MPa size, thickness is 15.

y******c

Workmanship inspection is conducted on Kaidi Sensors liquid level meter. Common assessments such as colorfastness to washing and rubbing, fiber strength, fiber structure, chemical agents are done by the QC team. It is available with installation instructions and videos

m******v

Kaidi Sensors liquid level meter is guaranteed by quality assessment. Its manufacturing workmanships such as cutting, sewing, and dying, and some chemical agents used such as dyestuff and anti-bacterial agents are required to pass relevant tests. It is available with installation instructions and videos

s******c

Our experienced quality inspectors have performed comprehensive performance tests on products such as performance and durability in accordance with international standards. It has gone through various quality checks and is trimmed at edges

u******d

Constant inspections: the product is manufactured under the constant inspections which are conducted by the QC team. They carry out an ongoing inspection method to ensure the quality of this product. Its form or shape can be the bar, tube, pipe, etc

a******w

This product is not only reliable in quality, but also excellent in long-term performance. It is available with installation instructions and videos

i******v

This product is superior to other products because of its excellent performance, durability and other characteristics. It is manufactured by a factory that is ISO9001:2005 certified

Product Message

*Name

Phone

*E-mail

*Content