KDF6061 Capacitive Fuel level sensor

Capacitive fuel level sensor refers to the capacitive liquid level sensor used to measure oil levels. As the height of electrode is fixed. The fuel level between the electrodes changes resulting in dielectric change which in turn results in change of capacitance.The Capacitive liquid level sensor is based on the principle of capacitance sensing. Capacitive Fuel Level Sensors are used extensively in motorsport, unmanned aerial vehicles, defence, aerospace and industrial applications for the measurement of petroleum,gasoline, diesel and ethanol blends.Our capacitive fuel sensor use innovative capacitive sensing technology to provide a continuous output of fuel level. Capacitive fuel sensors are ideally suited to harsh environment applications where high vibration is experienced.

Specifically, capacitive fuel level switch detect and measure material by capturing changes in capacitance values. Ground electrodes and detection electrodes work in a similar manner to these metal plates. Insulator between the metal plates acts as material to detect.

We have a range of standard mounting formats available, and each sensor is manufactured to the required length. If you’re unable to use our standard designs we can design a fuel level sensor for you – please just let us know your requirements.

Contact us, we are a professional capacitive fuel level switch supplier & manufacturer.

Advantages of capacitance level sensor
1.Simple structure. There are no movable elastic parts. Therefore, the reliability is relatively high and maintenance is minimal. Under normal circumstances, it is not necessary to carry out regular major, medium and minor repairs.
2.Liquid level detection is basically not affected by changes in process conditions. The buoyancy, differential pressure, and isotope level gauges are all related to the gravity of the medium in the detection. Severe changes in the gas-liquid phase medium will cause additional errors in the test results.
3.Wide application range. Aiming at the specific characteristics of the detected object. Specially customized. It can be adapted to liquid level detection under a variety of harsh conditions.
4.Easy to install. The built-in structure especially shows this characteristic. One person, one wrench. It can be installed in ten minutes.
5.Easy to adjust. The two potentiometers of zero position and range can perform zero shift or range compression or expansion at will within the effective range of liquid level detection.

Custom fuel level sensors work by measuring the voltage across a variable resistor within the sensing system, to determine the amount of fuel in the vehicle, which is then relayed to the driver via the indicating system.Want to konw more about custom fuel level sensor, Kaidi Sensors is your best choice of fuel level sensor manufacturers.

How to choose fuel level sensor

It is important to consider several factors when selecting a fuel level sensor, including the type of fuel, the size and shape of the tank, the measurement accuracy required, and the environment in which the sensor will be installed.

Type of Fuel: If you want to measure the level of gasoline, for example, you would need a sensor that is designed for use with gasoline.

Tank Size and Shape: The size and shape of the tank will also influence your choice of capacitance fuel level sensor. A sensor designed for use in small, cylindrical tanks may not be suitable for large, irregularly shaped tanks.

Measurement Accuracy: The level of accuracy required will depend on the application. If you need precise measurements, you may want to consider a sensor with a higher resolution or greater sensitivity.

Environmental Factors: A sensor's performance and lifespan can also be affected by factors such as temperature, humidity, and exposure to chemicals or other substances in the environment.

Cost: In addition to choosing a sensor that meets your needs, it is also important to make sure it fits within your budget.

Overall, when choosing a fuel level sensor, it's important to carefully consider all of these factors and select the sensor that best meets your requirements.

Please Send Us your Application details

Measuring range , medium, Installation method (flange, thread), Pressure range, Remote transmitter, Level alarm switch

Our technical team will check your specifications and make a best solution for you.

More Model available for all appication, different termperture and pressure!