Kaidi Sensors new electromagnetic flow meter factory for industrial

Company Advantages
1. The design of electromagnetic flow meter is specifically for . This product stands out for its high sensitivity
2. Users can cuddle with this bedding without worry as the fabric used for it is healthy and is considered hypoallergenic. This product has a wide range of operating temperatures
3. [企业简称] adopts new technology and new technology to manufacture packaging bottles, and the produced electromagnetic flow meter has good light protection, good sealing performance, stable quality, high quality, and enjoys a high degree of recognition in the market.

A magnetic flow meter (mag meter, electromagnetic flow meter) is a transducer that measures fluid flow by the voltage induced across the liquid by its flow through a magnetic field. A magnetic field is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines. The physical principle at work is electromagnetic induction. The magnetic flow meter requires a conducting fluid, for example, water that contains ions, and an electrical insulating pipe surface, for example, a rubber-lined steel tube.

If the magnetic field direction were constant, electrochemical and other effects at the electrodes would make the potential difference difficult to distinguish from the fluid flow induced potential difference. To mitigate this in modern magnetic flowmeters, the magnetic field is constantly reversed, cancelling out the electrochemical potential difference, which does not change direction with the magnetic field. This however prevents the use of permanent magnets for magnetic flowmeters.

Specifications

- Size: DN10~DN600 (PTFE) ; DN40~DN1200 (NBR)

- Standard pressure: PN1.0MPa~40MPa;

- Accuracy: ±0.5%~±1.0%;

- Supply power: 85 to 250VAC (45 to 63Hz), 16 to 36VDC;

- Signal output: Current Output: 4~20mA;

- Frequency Output: 0~5000Hz with photoelectric isolation;

- Pulse Output: 0.001~1.000m3/cp, 0.001~1.000 Ltr/cp, 0.001~1.000USG/cp,0.001~1.000 UKG/cp;

- Alarm Output: Upper Alarm-ALMH, Lower Alarm-ALML with photoelectric isolation;

- Communications: RS-232 without galvanic isolation, RS-485 with Galvanic isolation;

- Ambient temperature: -10~60;

- Relative humidity: ≤85%RH;

- Atmospheric pressure: 86KPa~106KPa;

- Applicable Fluid: electrically conducting liquid;

- Fluid temperature:-25~ +65 and -25~ +180;

- Electrical conductivity: 5us/cm.

Company Features
1. Guangdong Kaidi Energy Technology Co., Ltd. is leading company integrating R&D, manufacturing and sales for electromagnetic flow meter .
2. Our factory has imported a series of advanced production facilities that can ensure constant and steady production. This means that thousands of products can be made in astonishingly short periods of time.
3. Kaidi Sensors always insists on putting quality the first. Get quote!