Kaidi Sensors best insertion type magnetic flow meter factory for transportation

Company Advantages
1. Kaidi Sensors is carefully mnufactured. It is completed by several basic processes. They include cutting, sewing, assembling, decorating, etc. This product has been certified under CE and RoHS
2. The product is widely used in various industries. This product is characterized by excellent temperature stability
3. The product has a glass-like surface. Its clay materials are fired at an extremely high temperature which leads to its fine texture that feels as smooth as glass. This product stands out for its high sensitivity
4. The product can be stored or collected for a long time. It's not prone to oxidization or deformation after going through a special surface treatment. This product features very low no-load losses
5. The product features mildew resistance. The mouldproof process is conducted to endow the materials with excellent and long-lasting mildew proof capacity in the sunlight, atmosphere, or contaminant conditions. Since it is maintenance-free, this product significantly helps save operation costs

A magnetic flow meter (mag meter, electromagnetic flow meter) is a transducer that measures fluid flow by the voltage induced across the liquid by its flow through a magnetic field. A magnetic field is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines. The physical principle at work is electromagnetic induction. The magnetic flow meter requires a conducting fluid, for example, water that contains ions, and an electrical insulating pipe surface, for example, a rubber-lined steel tube.

If the magnetic field direction were constant, electrochemical and other effects at the electrodes would make the potential difference difficult to distinguish from the fluid flow induced potential difference. To mitigate this in modern magnetic flowmeters, the magnetic field is constantly reversed, cancelling out the electrochemical potential difference, which does not change direction with the magnetic field. This however prevents the use of permanent magnets for magnetic flowmeters.

Specifications

- Size: DN10~DN600 (PTFE) ; DN40~DN1200 (NBR)

- Standard pressure: PN1.0MPa~40MPa;

- Accuracy: ±0.5%~±1.0%;

- Supply power: 85 to 250VAC (45 to 63Hz), 16 to 36VDC;

- Signal output: Current Output: 4~20mA;

- Frequency Output: 0~5000Hz with photoelectric isolation;

- Pulse Output: 0.001~1.000m3/cp, 0.001~1.000 Ltr/cp, 0.001~1.000USG/cp,0.001~1.000 UKG/cp;

- Alarm Output: Upper Alarm-ALMH, Lower Alarm-ALML with photoelectric isolation;

- Communications: RS-232 without galvanic isolation, RS-485 with Galvanic isolation;

- Ambient temperature: -10~60;

- Relative humidity: ≤85%RH;

- Atmospheric pressure: 86KPa~106KPa;

- Applicable Fluid: electrically conducting liquid;

- Fluid temperature:-25~ +65 and -25~ +180;

- Electrical conductivity: 5us/cm.

Company Features
1. Now, Guangdong Kaidi Energy Technology Co., Ltd. has occupied a large share of insertion type magnetic flow meter market.
2. Guangdong Kaidi Energy Technology Co., Ltd. has an experienced team of designers and skilled production team.
3. Kaidi Sensors values the work that can add value for customers. Welcome to visit our factory!