KAIDI magnetrol level transmitter company for transportation

Company Advantages
1. The manufacture of KAIDI involves a series of processes, from the mixture of the raw material to forming, cutting and packaging. This product features a frequency response property
2. People needn't spend too much time taking care of it. It does not need frequent ironing and other special treatment. It is able to quickly and effectively detect and respond to some types of input
3. The product is able to maintain its color. It is not susceptible to cosmetics that contain zinc oxide, titanium dioxide, ferric oxide, and calamine. This product has the advantage of high accuracy
4. The product features abrasion resistant. It is able to withstand a certain amount of rubbing action without being destroyed. This product features very low no-load losses
5. The product features great shock-resistance. Its toe cap has been tested to be strong enough to resist impact and compression. This product stands out for its high sensitivity

Feature: 　 Horn antenna, the echo signal is stronger.

Should be used: 　 adapt to the environment of various process conditions, can measure small dielectric constant medium.

Maximum range: 　70m

Measurement accuracy: 　±20mm

Process connection: 　 flange 316L

Antenna material: 　 stainless steel 316L/PTFE

Process temperature: 　-40…200°C

Process pressure: 　-1.0…40bar

Frequency range: 　6GHz

Signal output: 　Two-wire system/four-wire system 4…20mA/HART

 

Detailed introduction:

GDRD54

Permit

P Standard type (non-explosion-proof)

I Intrinsically safe type (Exia IIC T6)

C Intrinsically safe type + marine license (Exia IIC T6)

G Intrinsically safe type + flameproof type (Exd [ia]ia IIC T6)

Antenna type/material

F Horn antenna 150/Stainless steel 316L

G Horn antenna 200/Stainless steel 316L

H Horn antenna 200 lengthened/stainless steel 316L

Antenna extension tube

A None

B 200mm

C 500mm

D 1000mm

X Special customization

Process connection

FB flange DN150 PN1.6 stainless steel 316L (GB/T9119-2000)

FC flange DN200 PN1.6 stainless steel 316L (GB/T9119-2000)

YP Special

Sealing/process temperature

2 Viton/-40～+130℃

3 Kalrez/-20～+130℃

4 Viton/-40～+200℃with heat sink (selected when the process temperature is greater than 100℃)

5 Kalrez/-20～+200℃with heat sink (selected when the process temperature is greater than 100℃)

Electronic components

B (4～20)mA/HART two-wire system

C (4～20)mA/(22.8～26.4)V DC/HART two-wire/four-wire system

D (198～242)V AC/HART four-wire system

Enclosure rating

A Aluminum/IP67

B Plastic/IP66

D Aluminum two-chamber/IP67

G Stainless steel 316L/IP67

Cable entry

M M20x1.5

N ½NPT

On-site display/programming

A belt

X without

Purge

A belt

X without

Note: Intrinsically safe + marine license (Exia IIC T6) is limited to "A" or "B" electronic components and "G" type enclosure; intrinsically safe + flameproof type (Exd [ia]ia IIC T6) is limited to use "D" shell.

Company Features
1. The factory has strict quality management from the initial production stage. From raw materials selection, product design, production, to the complete package, we always guide our actions adhering to the ISO 9001 international quality system.
2. Our company are always following service tenet: . Get quote!