KAIDI magnetic flow meter suppliers for work

Company Advantages
1. This type of magnetic flow meter uses such materials with stainless steel flow meter properties. It generates only little magnetic interference
2. Guangdong Kaidi Energy Technology Co., Ltd. has obtained the trust and support of customers with continuous efforts. This product is easy to install and use
3. Test results prove that the magnetic flow meter with stainless steel flow meter design is volumetric flow meter . This product has the feature of explosion-proof

A magnetic flow meter (mag meter, electromagnetic flow meter) is a transducer that measures fluid flow by the voltage induced across the liquid by its flow through a magnetic field. A magnetic field is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines. The physical principle at work is electromagnetic induction. The magnetic flow meter requires a conducting fluid, for example, water that contains ions, and an electrical insulating pipe surface, for example, a rubber-lined steel tube.

If the magnetic field direction were constant, electrochemical and other effects at the electrodes would make the potential difference difficult to distinguish from the fluid flow induced potential difference. To mitigate this in modern magnetic flowmeters, the magnetic field is constantly reversed, cancelling out the electrochemical potential difference, which does not change direction with the magnetic field. This however prevents the use of permanent magnets for magnetic flowmeters.

Specifications

- Size: DN10~DN600 (PTFE) ; DN40~DN1200 (NBR)

- Standard pressure: PN1.0MPa~40MPa;

- Accuracy: ±0.5%~±1.0%;

- Supply power: 85 to 250VAC (45 to 63Hz), 16 to 36VDC;

- Signal output: Current Output: 4~20mA;

- Frequency Output: 0~5000Hz with photoelectric isolation;

- Pulse Output: 0.001~1.000m3/cp, 0.001~1.000 Ltr/cp, 0.001~1.000USG/cp,0.001~1.000 UKG/cp;

- Alarm Output: Upper Alarm-ALMH, Lower Alarm-ALML with photoelectric isolation;

- Communications: RS-232 without galvanic isolation, RS-485 with Galvanic isolation;

- Ambient temperature: -10~60;

- Relative humidity: ≤85%RH;

- Atmospheric pressure: 86KPa~106KPa;

- Applicable Fluid: electrically conducting liquid;

- Fluid temperature:-25~ +65 and -25~ +180;

- Electrical conductivity: 5us/cm.

Company Features
1. Guangdong Kaidi Energy Technology Co., Ltd. is active in many internally famous exhibitions in the pursuit of a wider market for magnetic flow meter . The factory is built strictly in line with regulations for workshops. The arrangement of the production line, ventilation, and indoor air quality have been taken into consideration. These good production conditions lay a foundation for stable product output.
2. The R&D technicians and designers are notable in the industry. They help clients customize products to very satisfactory. Over the years, their professionalism has been recognized by customers.
3. Our team of manufacturing experts has years of combined experience in the industry. They use their depth of experience to solve challenges from customers and bring them substantial results. We are working hard to conduct our sustainability practices. We are considering environmental factors in our product innovation process so that every product is up to environmental standards.