best liquid level meter suppliers for transportation

Feature: 　 Horn antenna, the echo signal is stronger.

Should be used: 　 adapt to the environment of various process conditions, can measure small dielectric constant medium.

Maximum range: 　70m

Measurement accuracy: 　±20mm

Process connection: 　 flange 316L

Antenna material: 　 stainless steel 316L/PTFE

Process temperature: 　-40…200°C

Process pressure: 　-1.0…40bar

Frequency range: 　6GHz

Signal output: 　Two-wire system/four-wire system 4…20mA/HART

Detailed introduction:

GDRD54

Permit

P Standard type (non-explosion-proof)

I Intrinsically safe type (Exia IIC T6)

C Intrinsically safe type + marine license (Exia IIC T6)

G Intrinsically safe type + flameproof type (Exd [ia]ia IIC T6)

Antenna type/material

F Horn antenna 150/Stainless steel 316L

G Horn antenna 200/Stainless steel 316L

H Horn antenna 200 lengthened/stainless steel 316L

Antenna extension tube

A None

B 200mm

C 500mm

D 1000mm

X Special customization

Process connection

FB flange DN150 PN1.6 stainless steel 316L (GB/T9119-2000)

FC flange DN200 PN1.6 stainless steel 316L (GB/T9119-2000)

YP Special

Sealing/process temperature

2 Viton/-40～+130℃

3 Kalrez/-20～+130℃

4 Viton/-40～+200℃with heat sink (selected when the process temperature is greater than 100℃)

5 Kalrez/-20～+200℃with heat sink (selected when the process temperature is greater than 100℃)

Electronic components

B (4～20)mA/HART two-wire system

C (4～20)mA/(22.8～26.4)V DC/HART two-wire/four-wire system

D (198～242)V AC/HART four-wire system

Enclosure rating

A Aluminum/IP67

B Plastic/IP66

D Aluminum two-chamber/IP67

G Stainless steel 316L/IP67

Cable entry

M M20x1.5

N ½NPT

On-site display/programming

A belt

X without

Purge

A belt

X without

Note: Intrinsically safe + marine license (Exia IIC T6) is limited to "A" or "B" electronic components and "G" type enclosure; intrinsically safe + flameproof type (Exd [ia]ia IIC T6) is limited to use "D" shell.

g******v

Kaidi Sensors liquid level meter meets the requirements of some necessary certifications. They may include CB certification, CCC certification, CCA certification, and LOVAG certification. It is made from high strength standard grade steel

m******d

In order to draw definitive conclusions about the features of Kaidi Sensors liquid level meter, various tests must be performed. These range from tests on moisture resistance, bending resistance and impact resistance. It is subjected to a rotary sanding to achieve fineness requirements

h******j

Kaidi Sensors liquid level meter has passed a wide range of necessary tests such as vibration testing, acoustic tests, endurance tests, and water ingress (IP) testing. Fatigue resistance is one of the most important mechanical properties of this product

e******k

Kaidi Sensors liquid level meter integrates both optical and mechanical designs. Its performance meets the designed specs both during manufacturing and after final assembly. It easily resists shock loads and torsional forces normally incurred by the bulldozer

k******y

Kaidi Sensors liquid level meter has gone through material appearance inspections. These checks include color, texture, spots, color lines, uniform crystal/grain structure, etc. As a wearing component, its excellent strength considerably lower maintaining costs

h******k

Durable in use: the quality of this product is assured base on its perfect design and fine craftsmanship. Thus it can be use-durable for a long time if it is maintained properly. It is made from high strength standard grade steel

Product Message

*Name

Phone

*E-mail

*Content

KAIDI liquid level meter suppliers for transportation