Español 
pусский 
العربية 
Português 
Kaidi KD KPC-LED Two-way pull cord switch With led IP67 high strength never rust
The tilt switch is mounted on a stainless steel chain and hung. When the material touches the switch and the switch is tilted to 20 degrees, it outputs a signal.
The tilt switch has strong wear resistance and firmness, and is widely used to detect the upper limit of the solid silo or transfer chute.
| Action angle | About 25° |
| Detection distance | Maximum 5m |
| Connection capacity | 0.5A 100VAC/1A 24VDC |
| Contact | 1b |
| Allowable temperature | -25℃~+70℃ |
| Protection grade | IP67 |
| Quality of heavy hammer | About 1.8kg(Heavy) |
| Quality of heavy hammer | About 1.0kg(Light) |
Please Send Us your Application details
Measuring range , medium, Installation method (flange, thread), Pressure range, Remote transmitter, Level alarm switch
More Model available for all appication, different termperture and pressure!
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist
Our technical team will check your specifications and make a best solution for you.