Español 
pусский 
العربية 
Português 
Kaidi KD-LCS20-SA Tilt Switch Conveyor
Description:
The belt longitudinal tear detection device is installed on the side of the buffer roller group below the blanking opening of the secondary chute.
A highly sensitive cable-type omnidirectional pressure sensor is used. When the pressure sensor receives pressure in any direction, it can immediately output a detection signal.
The belt longitudinal tear detection device is composed of a controller and multiple detectors. The number of detectors is determined by the number of buffer roller groups under the chute's blanking opening.
| Protection Grade | IP65 |
| Allowable temperature | （-20～＋60℃） |
| Belt width | Unlimited |
| Roller groove angle | Unlimited |
| Contact capacity | 2A/250ACV |
| power supply | AC 90～245V 50/60Hz |
| Protection Grade | IP40 |
| Allowable temperature | （-20～＋60℃） |
More Model available for all appication, different termperture and pressure!
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist
Our technical team will check your specifications and make a best solution for you.