Español 
pусский 
العربية 
Português 
Kaidi KD Battery-powered Electromagnetic Flow Meter Manufacturer
The FEMI plug-in electromagnetic flow meter is a new type of flow meter developed on the basis of the pipeline electromagnetic flow meter. It retains the advantages of the pipeline electromagnetic flow meter, and it is difficult to install the pipeline electromagnetic flow meter on the pipeline. , The cost is large and other defects. Especially after adopting the technology of tapping under pressure and under pressure installation, the plug-in electromagnetic flow meter can be installed without stopping the water, and can also be installed on cast iron pipes and cement pipes.
| Pipe diameter | 300～3000mm |
| Flow rate range | 0.1～10m/s |
| Accuracy | 0.5～10m/s：±1.5％FS；0.1～0.5m/s：±2.0％FS |
| 0.1～10m/s: ±2.5% FS (FS means 40%～100% full scale flow) | |
| Output | 4～20mA current output; pulse output can be set; |
| Protocol | RS485, HART communication protocol, MODBUS protocol |
| Conductivity | ＞5μs/cm |
| Straight pipe | Front 5DN, rear 3DN |
| Medium temperature | -20°C～/+130°C |
| Ambient temperature | -20°C～/+60°C |
| Withstand voltage | 1.6MPa |
| Protection level | IP65 (one body); IP68 (separate body) |
| Electrode material | 316L stainless steel |
| output signal | 4-20mA; RS485; HART protocol; MODBUS protocol |
| Sensor material | Stainless steel |
| Power supply | 220VAC, tolerance 15% or 24VDC, ripple ≤5% |
| power | 6.5W |
| Withstand voltage rating | ≤1.6MPa |
| FEM electromagnetic Flow Meter | ||
| Pipe diameter | 300-3000mm | |
| Instrument type | S | All-in-one |
| L | Split type | |
| Withstand voltage rating | P1 | 1.6MPa |
| P2 | 1.0MPa | |
| P3 | 0.6MPa | |
| P-(n) | Negotiate order | |
| Power | D | 24VDC |
| A | 220VAC | |
| Output | 0 | no output |
| 1 | Pulse equivalent | |
| Protocol | 2 | 4-20mA |
| 0 | No communication | |
| 1 | RS485 | |
| 2 | RS232 | |
| 3 | ModbuS | |
| 4 | Hart | |
| Explosion proof | N | No explosion-proof |
| E | Explosion-proof Ex dibIIBT4Gb | |
| Range | n | Unit: m3/h |
| Example: F M -500SP1D24N-2000 | ||
Please Send Us your Application details
Measuring range , medium, Installation method (flange, thread), Pressure range, Remote transmitter, Level alarm switch
More Model available for all appication, different termperture and pressure!
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist
Our technical team will check your specifications and make a best solution for you.