KAIDI high-quality rosemount flow meter factory for transportation

Company Advantages
1. Guangdong Kaidi Energy Technology Co., Ltd. put lots of time and energy even on outline of rosemount flow meter .
2. This product is somewhat fire retardant. The insulating materials used for this product meet higher demands in glow wire testing.
3. This product is often effortless to use once it has been set up. And as a visual aid, it can help to maintain the listener's attention and interest.

A magnetic flow meter (mag meter, electromagnetic flow meter) is a transducer that measures fluid flow by the voltage induced across the liquid by its flow through a magnetic field. A magnetic field is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines. The physical principle at work is electromagnetic induction. The magnetic flow meter requires a conducting fluid, for example, water that contains ions, and an electrical insulating pipe surface, for example, a rubber-lined steel tube.

If the magnetic field direction were constant, electrochemical and other effects at the electrodes would make the potential difference difficult to distinguish from the fluid flow induced potential difference. To mitigate this in modern magnetic flowmeters, the magnetic field is constantly reversed, cancelling out the electrochemical potential difference, which does not change direction with the magnetic field. This however prevents the use of permanent magnets for magnetic flowmeters.

Specifications

- Size: DN10~DN600 (PTFE) ; DN40~DN1200 (NBR)

- Standard pressure: PN1.0MPa~40MPa;

- Accuracy: ±0.5%~±1.0%;

- Supply power: 85 to 250VAC (45 to 63Hz), 16 to 36VDC;

- Signal output: Current Output: 4~20mA;

- Frequency Output: 0~5000Hz with photoelectric isolation;

- Pulse Output: 0.001~1.000m3/cp, 0.001~1.000 Ltr/cp, 0.001~1.000USG/cp,0.001~1.000 UKG/cp;

- Alarm Output: Upper Alarm-ALMH, Lower Alarm-ALML with photoelectric isolation;

- Communications: RS-232 without galvanic isolation, RS-485 with Galvanic isolation;

- Ambient temperature: -10~60;

- Relative humidity: ≤85%RH;

- Atmospheric pressure: 86KPa~106KPa;

- Applicable Fluid: electrically conducting liquid;

- Fluid temperature:-25~ +65 and -25~ +180;

- Electrical conductivity: 5us/cm.

Company Features
1. As an exporter in the rosemount flow meter field, Guangdong Kaidi Energy Technology Co., Ltd. has established many customer relationships.
2. As a well-developed magnetic flowmeter supplier, KAIDI introduces high-end technology for production.
3. We are working hard to become an innovative leader in this field. We will invest more capital and talent resources in cultivating our R&D team to continuously promote technological innovation. Our commitment is to identify the best solution for customers' projects, enabling them to become the first choice of their customers'.