KAIDI custom magnetic float level transmitter factory for transportation

Company Advantages
1. A list of factors is taken into account of KAIDI conception. They involve complexity, feasibility, optimization, tests, etc. of a machine. This product has been certified under CE and RoHS
2. The product offers added comfort and support such as massaging, orthotic and arch support. People will enjoy wearing their shoes if the product is inserted in them. This product is notable for its strong overload capacity
3. The product features high security. All its components are well protected by the necessary interlocking apparatus, so as to prevent components are tossed out during operation. Its shape can be customized according to needs
4. Because it is not wrinkle-prone, this product is often an easier option to care for. And it can be machine-washed to fit a busy lifestyle. There is little variation between its measuring values
5. This product is electrically safe. Tests such as dielectric withstand test, insulation resistance test, and leakage current test have verified its safety when connected to a voltage that is high enough to present a hazard to the operator. This product has a high level of IP

Product introduction

Ultrasonic level gauge (measuring material level, liquid level) is a non-contact, highly reliable, cost-effective, and easy-to-install and maintain level measuring instrument. It can meet most of the level measurement requirements without contacting the medium. It is a new generation of ultrasonic level meter that our company has developed after years of hard work and has completely independent property rights.

Debugging   

Because the installation environment of the instrument is different. Therefore, the ultrasonic level meter must know the basic conditions of the required measurement before working, such as: measuring range, zero point, full range and field conditions, etc. Therefore, the meter must be set up before measurement.

 

Technical parameters of integrated ultrasonic level gauge

Product display diagram

Installation guide

(1)Measuring liquid

 In the reservoir, generally speaking, the installation height of the meter should be determined according to the highest water level. You must pay attention to the distance between the highest water level and the probe. When the water level is low, there are objects at the bottom of the pool, and this edge should use a refraction plate. Block.

There is an obstacle at the bottom of the pool-use a baffle to refract

If there is a strong vortex or vortex in the container, such as the vortex caused by a stirrer or a strong chemical reaction, the measurement will be very difficult. The ideal way is: the sensor probe can be installed in the still tube or the bypass tube for measurement.

The surface of the medium fluctuates greatly-use a bypass tube or add a still tube to measure

(2)Common installation errors

①Bubbles: 

If the bubbles on the surface of the medium are large and the bubble layer is thick, it will cause measurement errors and even fail to receive the reflected ultrasonic waves. Please take measures to prevent air bubbles, or install the sensor in the bypass pipe for measurement.Other measuring instruments can also be used, such as radar level gauges, magnetostrictive level gauges.

②The sensor is installed in the wrong direction

If the sensor is not mounted on the surface of the medium, the measurement signal will be weakened. To ensure the best measurement effect, please align the axis of the sensor with the surface of the medium, which is perpendicular to the surface of the interface to be measured.

Company Features
1. Our technology takes the lead in the industry of magnetic float level transmitter .
2. We believe that sustainable manufacturing is efficient manufacturing. The computerized production lines we use cut costs and energy usage by ensuring that power is used only when it is needed.