high-quality ultrasonic type level transmitter factory for work

Feature: 　Various patented antennas, anti-condensation, anti-hanging material, the minimum emission angle is 8 degrees. Solve the blindness of 6G radar in the small tank

　　　　　　 Large area, multiple echo problem.

Should be used: 　 is widely used in the measurement of various liquid levels. Such as: oil tank, etc.

Maximum range: 　30m

Measurement accuracy: 　±3mm

Antenna material: 　(T type) stainless steel 316L horn/PTFE vibrator

　　　　　　(V type) stainless steel 316L/PTFE vibrator

Antenna structure: 　 (T type) pointed cone vibrator, poor anti-condensation

　　　　　　(V type) cone vibrator, anti-condensation

Process temperature: 　(T type)(-40～250)°C

　　　　　　(V type)(-40～200)°C　

Process pressure: 　(T type)(-0.1～4)MPa

　　　　　　(V type)(-0.1～0.3)MPa

Frequency range: 　26GHz

Signal output: 　(4～20)mA/HART

Electric source: 　Two-wire system/four-wire system

Detailed introduction:

GDRD56

Permit

P Standard type (non-explosion-proof)

I Intrinsically safe type (Ex ia IIC T1～T6)

Antenna type/material

B (T type) horn antenna Φ48mm/stainless steel 316L

C (T type) horn antenna Φ78mm/stainless steel 316L

H (T type) horn antenna Φ98mm/stainless steel 316L

I (T type) horn antenna Φ98mm (extended)/stainless steel 316L

J (T type) Horn antennaΦ123mm/Stainless steel 316L

M (V type) horn antenna Φ98mm/stainless steel 316L/PFA430 cover

N (V type) horn antenna Φ98mm (extended)/stainless steel 316L/PFA430 cover

P (V type) horn antenna Φ123mm/stainless steel 316L/PFA430 cover

X Special custom seal/process temperature

2 Viton(-60～150)℃

3 Kalrez(-60～250)℃

Electronic components

B (4～20)mA/HART two-wire system

C (4～20)mA/(22.8～26.4)V DC /HART two-wire/four-wire system

D (198～242)V AC/HART four-wire system

Enclosure rating

A Aluminum/IP67

B Plastic/IP66

D Aluminum two-chamber/IP67

G Stainless steel 316L/IP67

H stainless steel two-chamber 316L/IP67

Cable entry

M M20x1.5

N ½ NPT

On-site display/programming

A belt

X without

Note: Intrinsically safe type (Ex ia IIC T1～T6) can only use "B" electronic components and "A" "G" type shell

The standard flange size refers to GB/T9119-2000 PN1.6MPa size, and the thickness is 15.

c******e

Kaidi Sensors ultrasonic type level transmitter has a good design. It is made by our professional designers using the finest materials and finishes. The drop-in paper loading is easy to handle

b******p

Kaidi Sensors ultrasonic type level transmitter has a stylish design. Following the latest fashion trends and made with the assistance of CAD software, its design will never go out of date. The images or characters produced by it are water damage resistant

q******x

Kaidi Sensors ultrasonic type level transmitter is designed according to the wishes of the customers. Its color, font, and form meet the needs of the packaged product. Containing few detachable parts, this product saves much maintenance cost

v******i

Kaidi Sensors ultrasonic type level transmitter has a beautiful design. Its visual effect is attractive with the efforts of our internal professional designers.

l******a

The production of Kaidi Sensors ultrasonic type level transmitter is based on high packaging and printing standards, combined with traditional methods and modern advanced packaging & printing technology. This product is advantageous in lightweight and portability

e******v

The solar panel part of the product needs low maintenance. There is no moving part on the panel and it is highly durable. It offers many conveniences for users because it does not need to replace the ribbons and ink cartridges

Product Message

*Name

Phone

*E-mail

*Content