Wind speed measuring instrument daily maintenance and maintenance method

Wind speed measuring instrument daily maintenance and maintenance method of wind speed measuring instrument nickname anemometer, in the application process, actual operation and environmental pollution problems have some common failures problem, based on the normal application and characteristics of anemometer will lead to the dangers of must. Below small make up for the actual detail some anemometer in peacetime maintenance way, look forward to assist in the use of stronger anemometer goods from the customers. Anemometer daily maintenance method 1. It is strictly prohibited in the flammable gas natural environment application anemometer. 2. It is forbidden to place the anemometer cameras in the flammable gas. Otherwise, it will cause fire and explosion accident. 3. Please according to the provisions of the manual properly applied anemometer. Mistake operation, will cause accident getting an electric shock, fire accidents and the destruction caused by the controller. 4. In the application, in case of anemometer release the abnormal smell, noise or smoke, and liquid injection anemometer, please standby immediately remove the rechargeable battery. Otherwise, there will be damaged by high voltage electric shock, fire accidents and the risk of anemometer. 5. Don't have a camera and anemometer itself exposure in the rain. Otherwise, there will be a high voltage electric shock and fire accident and injury, with the risk of personal safety. 6. Don't touch the camera internal controller position. 7. Anemometer long term should not be used, please remove the internal rechargeable battery. Otherwise, will rechargeable battery liquid leakage, will be also damaged anemometer. 8. Don't need anemometer placed in high temperature, high temperature, dusty and the sun. Otherwise, will cause damage to internal components or turning anemometer characteristics. 9. Don't volatile liquid to wash the anemometer. Otherwise, will cause the anemometer casing deformation rub off. Anemometer surface dirt, can use soft fabric and detergent to scrub. 10. There is no need to fall or pressure anemometer. Otherwise, will cause a common fault or damage of anemometer. 11. Don't have to be in since anemometer induction electric touch under the condition of the position controller of cameras. Precise measurement results or otherwise, will harm caused by the destruction of anemometer internal power supply circuit.