What is the reason for the electromagnetic flow meter if the signal is not received or too weak

Abstract: If the electromagnetic flow meter cannot receive the signal or is too weak, the information is provided by the excellent flow meter and flow meter production and quotation manufacturers for you. If the electromagnetic flowmeter cannot receive the signal or is too weak, the article is provided by Jiangsu Jinhu Lianyi Automatic Control. Thanks to the instrument exhibition network for its support. Electromagnetic flowmeters generally operate normally for a long time without maintenance after installation. ,after. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following is the article details of why the electromagnetic flowmeter cannot receive a signal or is too weak. If the electromagnetic flowmeter cannot receive the signal or is too weak, the article is provided by Jinhu Lianyi Automatic Control. Thanks to the instrument exhibition network for its support. The electromagnetic flowmeter can generally operate normally for a long time without maintenance after installation. Maintenance and daily inspections are then required. Not receiving a signal or a signal that is too weak are minor problems. So don't be surprised if it appears, you can solve it by doing the following steps carefully. 1. First confirm whether the pipeline is full of fluid. 2. If the pipe is too close to the wall, the probe can be installed on the diameter of the pipe with an inclined angle instead of the diameter of the horizontal pipe. The Z method should be used to install the probe. 3. Carefully select the dense part of the pipeline and fully polish and brighten it, apply sufficient coupling agent to install the probe; 4. Move each probe slowly and carefully around the installation point to find the maximum signal point to prevent scaling or damage on the inner wall of the pipeline. Because the local deformation of the pipeline causes the ultrasonic beam to reflect out of the expected area and miss the installation point where a strong signal can be received; 5. For the metal pipeline with serious inner wall scaling, the scaling method can be used to make the scaled part fall off or crack, but it is necessary to Note that this method sometimes does not help the transmission of ultrasonic waves at all due to scaling and voids created between the inner walls. Do you understand the issue now? Keep it simple. These problems should be solved when choosing and installing again. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'What is the reason if the electromagnetic flow meter cannot receive the signal or is too weak'
These level gauge customized level indicator are meant to serve as a guide for business owners on how to both identify potential opportunities for transformative innovation and how to adapt to the constantly changing technologies of today.
As manufacturers we are determined to be the very best in level gauge, regardless of the size, pedigree or inclinations of our competitors.
We began investing in our workforce and negotiated deals with major suppliers and providers to lower the cost of equipment so the technicians could enhance the competitiveness of level gauge right away.
Guangdong Kaidi Energy Technology Co., Ltd. is a initial company that supports expertise in searching marketing solutions.