The basic essentials of the operation of the washer electromagnetic flow meter

Abstract: The basic operation information of the gasket electromagnetic flowmeter is provided by the excellent flowmeter and flowmeter manufacturers and quotation manufacturers. Gasket Electromagnetic flowmeter Basic operation essentials 1. Always use the vent test to make the downstream pressure atmospheric pressure. If the pressure difference is too large or too small, it can be adjusted by replacing the orifice plate. 2. When the wind blows, the gas should be measured with the wind, not against the wind, and the gas outlet should not be. For more flowmeter manufacturers to select models and price quotations, you are welcome to inquire. The following is the basic essentials of the operation of the gasket electromagnetic flowmeter. Basic operation of gasket electromagnetic flowmeter 1. Always use the vent test to make the downstream pressure equal to atmospheric pressure. If the pressure difference is too large or too small, it can be adjusted by replacing the orifice plate. 2. When the wind blows, the gas should be measured along the wind, not against the wind. There should be no obstructions at the gas outlet. The U-shaped pipe must be upright to avoid reading errors. 3. The operation should be stable. At the beginning, the differential pressure and airflow temperature should be recorded every 5 minutes until stable. 4. During the test, it is appropriate to use 30-150 mm measuring liquid in the U-shaped tube. Generally, when the gas volume is below 3000 m3/d, it is better to hold water in the U-shaped tube. When it is above 3000 m3/d, it can be replaced with mercury. 5. In order to facilitate the reading of differential pressure, the water should be added with an appropriate color, and the water quality should be clean. 6. When the side gas is used, there should be no open flames and inflammables around to ensure the safety of gas measurement. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Basic Essentials of Operation of Gasket Electromagnetic Flow Meter'
Guangdong Kaidi Energy Technology Co., Ltd. is experienced in producing customized level indicator level gauge products featuring topnotch quality with ODM services available. Welcome to visit our site at Kaidi level indicator.
You can find a large selection of quality at Kaidi level indicator. Go get your desired one.
level gauge is attracting a great positive feedback from the customers. And many of our clients are fully satisfied with it.