Structure description of electromagnetic flow meter

Abstract: The structure description information of the electromagnetic flowmeter is provided by the excellent flowmeter and flowmeter manufacturers and quotation manufacturers. The structure of electromagnetic flowmeter is mainly composed of magnetic circuit system, measuring conduit, electrode, shell, lining and converter. Magnetic circuit system: Its function is to generate a uniform DC or AC magnetic field. The DC magnetic circuit is realized by using a permanent magnet, and its advantage is the structure comparison. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following is the structure description of the electromagnetic flowmeter. The details of the article. The structure of electromagnetic flowmeter is mainly composed of magnetic circuit system, measuring conduit, electrode, shell, lining and converter. Magnetic circuit system: Its function is to generate a uniform DC or AC magnetic field. The DC magnetic circuit is realized by using a magnet, its advantage is that the structure is relatively simple, and it is less disturbed by the AC magnetic field, but it is easy to polarize the electrolyte liquid in the measuring catheter, so that the positive electrode is surrounded by negative ions, and the negative electrode is surrounded by positive ions. Surrounding, that is, the polarization phenomenon of the electrodes, and leads to an increase in the internal resistance between the two electrodes, thus seriously affecting the normal operation of the instrument. When the diameter of the pipe is large, the magnet is correspondingly large, bulky and uneconomical, so the electromagnetic flowmeter generally adopts an alternating magnetic field, and is generated by the excitation of a 50HZ power frequency power supply. Measuring catheter: its function is to let the measured conductive liquid pass through. In order to make the magnetic flux be shunted or short-circuited when the magnetic field line passes through the measuring conduit, the measuring conduit must be made of materials with non-magnetic conductivity, low electrical conductivity, low thermal conductivity and certain mechanical strength. Plastic, aluminum, etc. Electrode: Its function is to draw out an induced potential signal proportional to the measured value. The electrodes are generally made of non-magnetic stainless steel and are required to be flush with the lining so that the fluid can pass unobstructed. Its installation position should be in the vertical direction of the pipeline to prevent sediment from accumulating on it and affecting the measurement accuracy. Shell: Made of ferromagnetic material, it is the outer cover of the excitation coil of the distribution system, and isolates the interference of external magnetic fields. Lining: There is a complete electrical insulating lining on the inner side of the measuring conduit and the sealing surface of the flange. It directly contacts the liquid to be measured, and its function is to increase the corrosion resistance of the measuring conduit and prevent the induced potential from being short-circuited by the wall of the metal measuring conduit. Lining materials are mostly corrosion-resistant, high-temperature-resistant, wear-resistant PTFE plastics, ceramics, etc. Converter: The induced potential signal generated by the liquid flow is very weak and is greatly affected by various interference factors. The function of the converter is to amplify and convert the induced potential signal into a unified standard signal and suppress the main interference signal. Its task is to amplify and convert the induced potential signal Ex detected by the electrode into a unified standard DC signal. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Structure Description of Electromagnetic Flow Meter'
Everyone who has a customized level indicator wants it to look customized level indicator. However, in order to achieve that, it normally involves investing in a customized level indicator level gauge. Guangdong Kaidi Energy Technology Co., Ltd. can offer you the best solution.
You can get a of any specification from Guangdong Kaidi Energy Technology Co., Ltd. as we have varied specifications to suit different customized level indicator needs and cater to a wide client base existing in both domestic and overseas market. please feel free to enquire us at Kaidi level indicator.
Guangdong Kaidi Energy Technology Co., Ltd. also has an extensive line of products as level gauge.
If something seems too good to be true, then it can be a , which provides customized level indicator value over its cost.
Guangdong Kaidi Energy Technology Co., Ltd. has developed a unique technology with many applications including customized level indicator.