Plug-in electromagnetic flow meter features and installation needs attention

Abstract: The characteristics of the plug-in electromagnetic flowmeter and the local information that should be paid attention to in the installation are provided by the excellent flowmeter and flowmeter manufacturers and quotation manufacturers. According to the technical experts of Weinan and Shunda flowmeter manufacturers, the plug-in electromagnetic flowmeter is a new type of electromagnetic flowmeter developed on the basis of the split electromagnetic flowmeter. It retains the advantages of the split electromagnetic flowmeter. Body Electromagnetic. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following are the characteristics of the plug-in electromagnetic flowmeter and the details of the articles that need to be paid attention to during installation. According to the technical experts of the flowmeter manufacturer, the plug-in electromagnetic flowmeter is a new type of electromagnetic flowmeter developed on the basis of the split electromagnetic flowmeter. According to Faraday's principle of electromagnetic induction, the average flow rate of the fluid is measured by the electromagnetic method to obtain the problem-solving flow of the fluid. In fact, the appearance of the plug-in electromagnetic flowmeter has brought great convenience to the production site. The plug-in electromagnetic flowmeter is mainly used in places where ordinary electromagnetic flowmeters are inconvenient to install. The electromagnetic flowmeter is placed vertically into the pipeline for measurement, and the insertion electromagnetic flowmeter is mainly used to measure the volume flow of conductive liquid and slurry in closed pipelines. Including strong corrosive liquids such as acid, alkali, salt, etc. Let’s take a brief look at what points should be paid attention to when installing the plug-in electromagnetic flowmeter? The following aspects should be paid attention to when installing the plug-in electromagnetic flowmeter: 1. Vertical installation, when the flowmeter sensor is inserted into the pipeline, it should be clamped with the vertical diameter of the pipeline section. angle less than 5°. 2. Inclined installation, the angle between the axis of the flowmeter sensor and the axis of the pipeline under test is 45°, It is suitable for liquid flow measurement with large pipe diameter and other impurities in the measurement medium. The inclined installation method has small water resistance and is not suitable for entanglement. There are two methods for the insertion point of the plug-in electromagnetic flowmeter sensor: one is to insert it into the central axis of the pipe under test, and the other is to insert the inner wall of the pipe at 0.25D of the pipe. *, Clean up the welding slag and burrs on the mounting base of the tube under test. Second, turn off the upstream flow control valve of the plug-in electromagnetic flowmeter or use a low-pressure water supply. Third, install the DN50 ball valve to the mounting base. Note that the long cavity of the ball valve is upward, check whether the ball valve can be fully opened and closed, and install the compression threaded seat, compression nut and rubber sealing ring on the ball valve. Loosen the set nut. Insert the insertion rod of the plug-in electromagnetic flowmeter sensor into the pipeline under test through the ball valve. At the same time, it should be noted that the direction of the plug-in electromagnetic flowmeter sensor should be consistent with the direction of the fluid flow. Flowmeter manufacturers, professional selection, professional quotation, and strive to develop various flowmetering products, according to the needs of different customers, the requirements of different customer equipment, professional custom all kinds of non-standard flowmeter products, in full accordance with the parameters provided by customers and requirements to carry out for customers“Tailored”,persist in“Quality*, User*”The factory management policy ensures long-term stability and continuous improvement of product quality, and provides users with high-quality products and perfect services. To ensure that the flowmeter of the instrument leaves the factory to play the maximum effect, bringing more convenience and benefits to customers. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Characteristics of Insertion Electromagnetic Flow Meters and Points to Pay Attention to in Installation'

Looking for a producer to fix your level gauge problems? Then contact the level gauge experts at Guangdong Kaidi Energy Technology Co., Ltd., offering a wide range of products across the global market. Visit Kaidi level indicator to find our best offer!

For more information on this topic and others, please visit Kaidi level indicator. We are among the top manufacturers of level gauge customized level indicator in China, and we serve big names in level gauge industry. You can rely on us for our high quality . Send your enquiry!

What Guangdong Kaidi Energy Technology Co., Ltd. discovered was that innovation occurs when business models match up with one or more of the level gauge where technological advances overlap with market needs, thus resulting in growth and transformation.

Although there are various available in the market (such as customized level indicator, customized level indicator, and customized level indicator), recent study results have made this customized level indicator level gauge a preferred level gauge choice of the people.

If you are looking for best product, then here are some product like level gauge, customized level indicator and customized level indicator in various styles which will surely meet your demand. Visit Kaidi level indicator to know more!