LDG-350S electromagnetic flowmeter

Abstract: LDG-350S electromagnetic flowmeter information is provided to you by excellent flowmeter and flowmeter production and quotation manufacturers. I am honored to recommend the LDG-350S electromagnetic flowmeter, the key product of Huaian Runtai Instrument Co., Ltd., if you have any needs or suggestions, please contact us at 18252328676. LDG-350S separate electromagnetic flowmeter is suitable for measuring conductive liquid with conductivity greater than 5μs/cm. For more flowmeter manufacturers to select models and price quotations, you are welcome to inquire. The following is the details of the LDG-350S electromagnetic flowmeter article. LDG-350S separate electromagnetic flowmeter is suitable for measuring conductivity greater than 5μVolumetric flow of conductive liquid in s/cm. It can output 4 ~ 20 mA current signal for recording, adjustment and control, and at the same time meet the needs of on-site display. It can be widely used in the flow measurement of water source water, pure water, sewage and other conductive liquids in petroleum, chemical, tap water and other fields. The intelligent electromagnetic flowmeter can not only measure the flow of general conductive liquids, but also measure the volume flow of liquid-solid two-phase flow, high-viscosity liquid flow and salt, strong acid, and strong alkali liquids. Features of LDG-350S split electromagnetic flowmeter: 1. The measurement is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity. 2. There are no resistance parts in the measuring tube and no pressure loss. 3. High reliability plug-in installation method, the installation and maintenance of the sensor does not require dismantling the measuring tube, which is more suitable for on-site use, without long-term water supply, and can be installed on the old pipeline. 4. The structure is simple, the measuring tube of the electromagnetic flowmeter does not need lining, and the reliability is high. 5. Wide range of nominal diameters, suitable for all pipes with diameters between DN 300 and DN 3000. 6. Integrated ground electrode to achieve good grounding of the instrument. 7. The converter adopts surface mount technology (SMT), with self-test and self-diagnosis functions. 8. It is suitable for volume flow measurement of conductive fluids with conductivity greater than 5цs/cm. 9. There are no moving and throttling parts in the measuring tube, and the pressure loss is small. 10. Liners with different materials and electrodes have good corrosion resistance. 11. It is not affected by medium, density, viscosity, temperature, pressure and conductivity. 12. Low frequency rectangular wave excitation, not easy to interfere, stable and reliable. 13. The converter has low energy consumption, easy installation, and users do not need to debug. Technical performance indicators of LDG-350S split electromagnetic flowmeter: 1. Nominal diameter: (mm) DN10, 15, 20, 25, 32, 40, 50, 65, 80, 100…2000; 2. Maximum measurement flow rate: 10m/s; 3. Accuracy table grade: DN10, 15 and 700 ~ 2000 flow rate≥ 1m/s 0.5% r velocity< 1m/s 3mm/s; DN20 ~ 600 flow velocity≥ 1m/s 0.3% r flow rate< 1m/s 2mm/s; 4. Fluid conductivity:≥5μs/cm; 5. Nominal pressure: DN10 ~ DN50 4.0 MPa; DN65 ~ DN150 1.6 MPa; dn 200 ~ dn 1000 1.0 MPa; dn 1200 ~ dn 2000 0.6 MPa; 6. Signal output form: 4 ~ 20mA current output. 1 ~ 5000 Hz frequency output, pulse width 20 ms output; 7. Lining material: PTFE, neoprene, polyurethane, perfluoroethylene propylene (F46) and polyvinyl chloride (FS); 8. Maximum fluid temperature: poly Teflon split type 100°C; special order 150°C integrated type 70°C neoprene integrated type 70°C; 120°C integrated 70°C polyperfluoroethylene propylene (F46) special order; separate type 100°C integrated type 70°C PVC Ethylene (FS); Separate Type 80°C Integrated Type 70°C Polyurethane; When ordering at 45°C and 80°C, it indicates that the integral type is 70°C; Electrode Material: Stainless Steel, 0Cr18Ni12Mo2Ti, Hastelloy B(Hb), Hastelloy (CHc), titanium (ti), tantalum (ta), platinum/iridium alloy (pa); 10. Shell protection grade: IP65 and IP68; 11. Explosion-proof grade: explosion-proof B4; 12. Power supply: voltage 220 volts AC 50 Hertz;; 24 V DC; LDG-350S Split Electromagnetic Flowmeter The above is the entire content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'LDG-350S Electromagnetic Flowmeter'
Guangdong Kaidi Energy Technology Co., Ltd. has various branches in different countries worldwide.
Always do our research, follow the rules and plans ahead for additional expenses. Expanding is the goal of Guangdong Kaidi Energy Technology Co., Ltd.; expanding properly is the goal of the wise business.
Guangdong Kaidi Energy Technology Co., Ltd. affords you a suitable low price for proving our ethical considerations.