loading

news-INFO CENTER-Kaidi Sensors-img-1

INFO CENTER

Home > INFO CENTER

Why does the value of ultrasonic level meter fluctuate?

When the display value of ultrasonic level meter fluctuates, we can use the following methods to figure out the problem.

Why does the value of ultrasonic level meter fluctuate?

How to choose the radar level gauge?

At present, there are many types of radar level gauges on the market. Radar level gauges emit extremely short microwave pulses with very low energy and are transmitted and received through the antenna system. It has the advantages of stable performance, flexible use, high reliability, and easy maintenance. So when users choose radar level gauges, what factors should they pay attention to in order to choose a suitable radar level gauge? After reading the following 5 points, you will probably understand.

How to choose the radar level gauge?

How to solve a fault in the guided wave radar level gauge

It is believed that many users have encountered reading fluctuations when using guided wave radar liquid level meters. Many users do not know how to solve it for a while, and some users even directly want to replace the instrument. This is really easy, but it will greatly increase the cost. We should analyze the cause of this situation, and then correct debugging can be solved

How to solve a fault in the guided wave radar level gauge

How to Install 80GHz Radar Level Gauge

Radar level meter can be widely used in liquid and solid level measurement. Continuous level measurement of various media, even under high pressure, corrosive, hygienic or harsh conditions. Radar level meter is divided into non-contact radar level meter and contact radar (guided wave) level meter according to the different measurement purpose, material characteristics and storage tank environment.

How to Install 80GHz Radar Level Gauge

How to choose the lining material of magnetic flap level gauge tube?

As a kind of common liquid level measuring instrument, magnetic flap level gauge, because the measuring tube body is connected with the measured vessel, directly contact with the medium, therefore, the material of the tube body is good or bad for the service life of the magnetic flap level gauge has a direct impact.If you use stainless steel directly to measure some corrosive media, it is easy to be corroded and leakage, resulting in production accidents.

How to choose the lining material of magnetic flap level gauge tube?

Classification and construction of float level meter

Float level gauge according to the float installed in different locations are also divided into two types of internal and external float, the so-called internal and external division refers to the float installation place, in the measured liquid container is the internal float, in the measured liquid outside the container is called external float.

Classification and construction of float level meter

How to clean the internal electrode of the electromagnetic flowmeter regularly?

Electromagnetic flow meter is the application of the principle of electromagnetic induction, according to the conductive fluid through the applied magnetic field when the electric potential generated to measure the flow of conductive fluids of an instrument, because it is high precision measurement, stable performance, long working time, so in various industries can see its figure.

How to clean the internal electrode of the electromagnetic flowmeter regularly?

What should be paid attention to when measuring oily wastewater with radar Level sensor?

Radar level meter is a commonly used in liquid level measurement instrumentation, it can effectively and accurately measure the height of the liquid or solid in the container, widely used in chemical, food, pharmaceutical and other industries, especially for oily wastewater and other liquid level measurement occasions with very high measurement accuracy and reliability requirements, radar level meter is the preferred choice of many companies to measure the instrument.

What should be paid attention to when measuring oily wastewater with radar Level sensor?

Why does measuring steam require temperature and pressure compensation?

The specific volume of superheated steam is determined by the temperature and pressure of steam two parameters, and in different parameter ranges, the expression form of the specific volume is not the same, can not be expressed in the same general formula, so you can not get a unified formula for calculating the specific volume, can only be derived individually to find the temperature and pressure compensation metric.

Why does measuring steam require temperature and pressure compensation?

How radar level meter works better under large dust conditions!

With the development of modern industry, more and more industries need to measure and control the level of solid materials, such as cement, coal, powder, etc.. And in large dusty working conditions, traditional level meters are easily disturbed by dust, which leads to inaccurate measurement and affects production efficiency. Radar level meters, on the other hand, can work better by using special technology and materials to improve their ability to overcome dust interference.

How radar level meter works better under large dust conditions!

Calibration Method of Ultrasonic Level sensor under Different Errors

In liquid level measurement, ultrasonic Level sensor is a kind of non-contact material level measuring instrument that is widely used. However, in practical application, as temperature, humidity, dust, chemical composition of the measured liquid and other factors will affect the measurement accuracy of the ultrasonic Level sensor wholesale to varying degrees, it is necessary to master the calibration methods of different errors caused by different factors to achieve accurate measurement.

Calibration Method of Ultrasonic Level sensor under Different Errors

Will the current interfere with the radar level meter?

Radar level meter is an advanced measuring instrument for solid materials, process vessels or strong dust prone to crystallization and condensation. It has the advantages of low maintenance, high performance, high accuracy, high reliability and long service life.

Will the current interfere with the radar level meter?

How to reduce the error of ultrasonic level meter measuring brine tank

Brine tank level monitoring is an important means to evaluate whether the brine system of freezing project is operating normally. In the construction of freezing project, brine leakage accidents such as freezing pipe rupture are usually detected by observing the brine tank level, so brine tank level measurement is important.

How to reduce the error of ultrasonic level meter measuring brine tank

Is it necessary to set the dielectric constant for the radar liquid level sensor?

As a supplier of radar level meter for many years, Guangdong Kaidi Energy Technology Co., Ltd. often receives many inquiries, among which the more frequently mentioned question is "Why should the radar level meter set the dielectric constant?" For this question, today's detailed answer.

Is it necessary to set the dielectric constant for the radar liquid level sensor?

What role do instruments and meters play in Petrochemistry industry?

Petrochemistry industry, referred to as petrochemical industry, is one of the key pillar industries in China. It mainly processes and sells crude oil and natural gas, such as diesel, gasoline, kerosene, paraffin, asphalt, plastics, rubber, chemicals, etc.

What role do instruments and meters play in Petrochemistry industry?

BETTER TOUCH BETTER BUSINESS

Contact Sales at KAIDI.

CONTACT US

Copyright © 2025 Guangdong Kaidi Energy Technology Co., Ltd. | All Rights Reserved

Chat Online 编辑模式下无法使用

Leave Your Message inputting...

We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist

*Name：

*Phone：

*E-mail：

*Content：