Guided wave radar level meter installation instructions

1. The installation of the guided wave radar level gauge requires the installation of the guided wave radar level gauge to ensure that the cable or rod does not touch the internal obstacles within the entire range during installation. Therefore, the installation should avoid the facilities in the tank as much as possible, such as: people ladders , limit switches, heating equipment, brackets, etc. Also note that the cables or rods must not intersect the feed stream. 2. Selection of installation position of guided wave radar level gauge 1. Fixed powder installation position (1) Keep away from the discharge port and the feed port as far as possible. (2) The metal can does not touch the wall and bottom of the can in the entire range. (3) It is recommended to install at 1/4 or 1/6 of the diameter of the silo, and the minimum distance from the tank wall is 1/10 of the measurement range. (4) The minimum distance from the cable or rod probe to the tank wall is ≥300mm. (5) The distance between the bottom of the probe and the bottom of the tank is ≥30mm. (6) The minimum distance between the probe and the obstacle in the tank is ≥200mm. (7) If the bottom of the container is tapered, the center of the top of the tank can be installed. 2. The installation position of liquid material (1) can measure any medium with dielectric constant ≥1.8. (2) Generally used to measure the medium with viscosity ≤500cst and not easy to produce adhesion. (3) The maximum range of the rod radar can reach 6 meters. (4) It has strong penetrating ability to steam and foam, and the measurement is not affected. (5) In the liquid measurement environment with large foam, the single-rod guided wave radar level meter should be selected for measurement. 3. Installation Method of Guided Wave Radar Level Gauge If the diameter of the installed short pipe is 2' to 6', the height of the installed short pipe should be less than or equal to 100mm (the shorter the length of the thread and the short pipe, the more stable the measurement). Fix the cable probe at the bottom and select an insulating centering bracket to avoid the cable probe contacting the end of the short tube.
are present in just about every facet of modern life.
Guangdong Kaidi Energy Technology Co., Ltd. is an expert when it comes to level gauge. Got some level gauge problems that you want to address? Visit us now and we'll help you fix those problems ASAP. Go to Kaidi level indicator for more details.
Guangdong Kaidi Energy Technology Co., Ltd. emphasizes our commitment to quality in our laboratory and R&D services.
To ensure desired results, it is very essential that you get the right kind of from a certified provider..
Guangdong Kaidi Energy Technology Co., Ltd. is the best manufacturer which has rich experience on manufacturing.