Electromagnetic flow meter product description

Abstract: Electromagnetic flow meter product description information is provided by excellent flow meter and flow meter production and quotation manufacturers. Electromagnetic flowmeter consists of two parts: sensor and converter. It works based on Faraday's law of electromagnetic induction and is used to measure the volume flow of conductive liquids with a conductivity greater than 5S/cm. It is an inductive instrument for measuring the volume flow of conductive media. measurable. More flowmeter manufacturers choose models and price quotations. You are welcome to inquire. The following is the details of the electromagnetic flowmeter product description article. Electromagnetic flowmeter consists of two parts: sensor and converter. It works based on Faraday's law of electromagnetic induction and is used to measure electrical conductivity greater than 5μThe volume flow rate of S/cm conductive liquid is an inductive instrument for measuring the volume flow rate of conductive medium. It can measure the flow rate of dirty medium, corrosive medium and suspended liquid-solid two-phase flow. This is because there are no obstructed flow parts inside the measuring tube of the instrument, and only the lining of the measuring tube and the electrode are in contact with the measured fluid, and the material can be selected according to the properties of the measured fluid. For example, using polytrifluoroethylene or polytetrafluoroethylene as the inner lining can measure various corrosive media such as acids, alkalis, and salts; using wear-resistant rubber as the inner lining is especially suitable for measuring wear and tear with solid particles. Larger ore pulp, cement slurry and other liquid-solid two-phase flows, as well as various fibrous liquids and pulp and other suspended liquids. Electromagnetic flowmeter is a volumetric flow measuring instrument. During the measurement process, it is not affected by the temperature, viscosity, density and conductivity (within a certain range) of the measured medium. Therefore, the flowmeter can be used to measure the flow of other conductive liquids only after being calibrated with water. Electromagnetic flowmeters are widely used in petroleum, chemical, metallurgy, textile, papermaking, environmental protection, food and other industrial sectors and municipal management, water conservancy construction, river dredging and other fields of flow measurement. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Electromagnetic flow meter product description'
In the office, various are considered essential since they are used to achieve particular tasks in the office. Among these , level gauge, customized level indicator, and customized level indicator are widely used.
Have you been looking for a good level gauge customized level indicator provider? If so, we suggest that you check out Guangdong Kaidi Energy Technology Co., Ltd. at Kaidi level indicator.
level gauge allows users to apply in different ways for satisfying their needs.