Defining standard for protection level of electromagnetic flow meter

Abstract: The standard information on the definition of the protection level of electromagnetic flowmeters is provided by excellent flowmeter and flowmeter manufacturers. Electromagnetic flowmeter consists of two parts: sensor and converter. It works based on Faraday's law of electromagnetic induction and is used to measure the volume flow of conductive liquids with a conductivity greater than 5S/cm. It is an inductive instrument for measuring the volume flow of conductive media. Except measurable. More flowmeter manufacturers select models and price quotations. You are welcome to inquire. The following is the definition standard article details of the protection level of electromagnetic flowmeters. Electromagnetic flowmeter consists of two parts: sensor and converter. It works based on Faraday's law of electromagnetic induction and is used to measure electrical conductivity greater than 5μThe volume flow rate of S/cm conductive liquid is an inductive instrument for measuring the volume flow rate of conductive medium. In addition to measuring the volume flow of general conductive liquids, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali, and uniform liquid-solid two-phase suspension liquids such as mud, ore pulp, and paper pulp. Electromagnetic flowmeters are widely used in petroleum, chemical, metallurgy, textile, papermaking, environmental protection, food and other industrial sectors and municipal management, water conservancy construction, river dredging and other fields of flow measurement. Under normal circumstances, the protection level of electromagnetic flowmeter is IP65. According to the national standard GB4208-84 and the International Electrotechnical Commission standard IEC529-76, the standards for the protection level of electrical and electrical product enclosures are: A, IP65: It is a water-proof type, electromagnetic flow The meter sensor shell allows the faucet to spray water on the sensor from any direction of the electromagnetic flowmeter sensor. The pressure of the water spray is 30Kpa, the water output is 12.5L/S, and the distance is 3 meters. B. IP67: The electromagnetic flowmeter sensor can be used for immersion in water for a short time. C. IP68: It is a submersible type, which is suitable for long-term work in water or underground under a certain pressure. At this time, the sensor and display part of the electromagnetic flowmeter For separation, it is necessary to make a separate electromagnetic flowmeter, but the protection level requirements of the electromagnetic flowmeter must be emphasized. In general, the protection level should be selected according to the actual situation. If the sensor is required to be installed below the ground and is often flooded, IP68 should be selected. If the sensor is installed above the ground, IP65 and IP67 should be selected. In any case, the display part of the electromagnetic flowmeter cannot be watered or entered into the water, which will cause damage to the electromagnetic flowmeter. The above is the whole content of this article. You are welcome to inquire about the flowmeter selection and quotation of our factory. 'Definition Standard of Protection Level of Electromagnetic Flow Meter'

The manufacture marketing game of level gauge is changing with each innovation, and businesses of all products need to be ready to pounce.

Guangdong Kaidi Energy Technology Co., Ltd. assures you that you will be satisfied with its results and humbly request you to try this. We are hoping for a better business deal with you.

It is never too late to have a new mindset and to get things moving in the right direction. Choose Guangdong Kaidi Energy Technology Co., Ltd. to be your quality provider.