Combining multiple weighing sensor installation technique is how to do after that

Weighing sensors are commonly used, our installation of weighing module is very clear, but it is limited to a single weighing sensor installation. Need focuses on the combination weighing sensor installation, because in the actual application often applied to multiple weighing sensor manufacturer of different kinds of weighing sensor. High precision electronic weighing device is rarely used, for example, weighing sensor. Usually has three or more of the sensor is composed of a sensor system. On the one hand, in order to maintain the stability of the scale body itself, on the other hand may increase the weighing tonnage. In electronic weighing device composed of multiple sensors, in addition to the rational selection of load weighing sensor and properly installed outside, still should be paid attention to in weighing sensor on both sides of the mounting bracket and jack stand. Fixed support standard height should be slightly lower than the sensor's height, from 3 mm to 4 mm, so that the need to replace a sensor or maintenance, the ascending scale body with a jack and then in a fixed pillars inserted into the appropriate thickness of the mat iron, so that the sensor and the bracket can be separated from 4 mm to 5 mm as a temporary support. On the other hand, when the scale body overload, can protect the sensor. Use. In order to prevent the scale body and due to the impact of horizontal movement, should be based on appropriate scale structure installation limiter. Limiter installed should not exert any force in the vertical direction, and should be able to offset the effect of various horizontal force on the balance of body. Weighing sensor must be installed in horizontal plane, a load must be kept level, prevent tilt caused by uneven distribution of load and damage the sensor. When using multiple weighing sensor, we must know the installation considerations. The precision and stability of the weighing sensor itself is very good. If the installation is not correct, the precision of the weighing sensor variation or shorter service life, it is not cost-effective for us.

are present in just about every facet of modern life.

To be the safest, most progressive domestic level gauge, relentless in the pursuit of customer and employee excellence.

The best way to determine the ideal strategy of level gauge is to continually test and refine your selling and marketing tactics.

Consistency and simplicity go hand in hand. That means aligning KAIDI with the right platforms, speaking to the right customers with the right message, and selling the right idea.