What are the main points of the maintenance of the flowmeter

In the construction process of various projects, most of the cases will involve the arrangement and layout of the pipeline, and this involves a lot of professional knowledge, especially the need to use the flowmeter to measure the inside of the pipeline, in order to make the flowmeter installed It can be used normally after good, so it is necessary to do the related maintenance work normally. Specifically, the main points of flowmeter maintenance include the following aspects. 1. Do a good job of cleaning and moisture-proofing. During the process of installing and using the flowmeter, you should keep the cable joints clean and dry enough and take waterproof and moisture-proof measures. After each use, you should put the flowmeter and the cable head There is a protective device with a cover that is sealed and packaged, or it is wrapped in waterproof plastic. Circulating water pipeline flowmeter manufacturers emphasize that special attention should be paid to the completion of use, and it should not be waited and covered immediately, especially the electromagnetic flowmeter transmitter should also be cleaned and moisture-proof.　　Second, do a good job of protecting the flowmeter to avoid damage. 　　It is forbidden to connect the flowmeter during the cycle. This is to avoid that there are some hard rocks in it that will damage the internal structure of the flowmeter, which will lead to inaccurate measurement accuracy. Therefore, the manufacturer of measuring gas flowmeter reminds that after each construction is completed, some measures must be taken to protect the inner lining of the flowmeter, and must avoid the inner lining of the flowmeter, contact with oily substances so as not to affect the insulating lining, absolutely do not let hard Object scratches and bruises, and damage the surface finish. 3. Avoid vibration and inaccessible corrosive substances. When installing, disassembling, transporting and storing the flowmeter, it is strictly forbidden to throw the ground from the car or fall to the ground, because there are very precise parts inside the flowmeter, if strong vibration occurs Otherwise, it will deform or break the wire inside. In particular, the inside should not be in contact with oils, and any substances containing acids and alkalis to avoid corrosion or damage. The above are the aspects included in the maintenance points of the flowmeter. In addition, if the flowmeter jumps when the pump is turned on, then the baby should be cleared in time, so as to clear the occurrence of the signal jump. error. And it should be noted that after each measurement is completed, the measured data should be filled in the corresponding form, and the information such as the construction number and date should be noted in detail for future reference.

In an age when level gauge is increasingly important, the researchers believe manufacturers should pay close attention to their results.

As manufacturers we are determined to be the very best in level gauge, regardless of the size, pedigree or inclinations of our competitors.

More than half of customers said they have faith with Guangdong Kaidi Energy Technology Co., Ltd. and level gauge.

Unlike the customized level indicator, the is more flexibly used in accasions where customized level indicator .

customized level indicator level gauge are used largely for customized level indicator such as customized level indicator.