Electromagnetic flowmeter installation process and pipeline connection

Electromagnetic flowmeter, as a kind of high precision, high reliable and long use life flow measuring instrument, its structure is by direct contact with the pipeline medium is composed of the sensor and the upper signal converters. Its working principle is derived from the Faraday's law of electromagnetic induction, is used to measure conductivity greater than 5 & mu; S/cm of conductive liquid flow, is a kind of measurement instrument of conductive medium flow. Electromagnetic flowmeter can measure not only the flow of conducting liquid, usually can also be used for the measurement of strong corrosive such as strong acid, strong alkali liquid and even contain liquid solid two phase suspension liquid, such as mud, pulp, pulp, etc. So its application field is very broad, whether in the chemical production, or in the pharmaceutical, paper making, water supply, sewage treatment field has a widespread application. Electromagnetic flowmeter is mainly used for measuring the flow of fluid in the piping, so when we before using electromagnetic flowmeter, * to link up to the electromagnetic flowmeter and the pipeline, this is important in electromagnetic flowmeter installation work. Electromagnetic flowmeter and pipeline connection way is different also, cohesion method has the following kinds: a, flange connection: the connection method is more traditional, the two ends of the electromagnetic flowmeter are capable of connecting flange, with pipeline connection, as long as the two head of bolted flange and pipe flange good will, the cohesion can one-way device. The cohesion of the sensor volume is small, only suitable for use in small pipes. Second, clamp connection: the connection method comparison, some without their own flange electromagnetic flowmeter selection is the cohesion, can use bolt clamping between two pipe flanges, cohesion method is simpler. We need to know the electromagnetic flowmeter method of device in the clip of cohesion in without error. Three,, threaded connections: there are some small diameter electromagnetic flowmeter selection is threaded connection, usually in the medical, food industry will use this kind of connection method. Other, this kind of cohesion in the use of the exploration of oil, there is also a must. Four, clean type connection: now some of the small diameter pipes chosen is the cohesion, we are often called clean type cohesion is clamp connection, after this cohesion, electromagnetic flowmeter can device and apart, its clean and protect at ordinary times also is very convenient.
Guangdong Kaidi Energy Technology Co., Ltd. is dedicated to servicing our customers with a wide array of high-quality service and products.
Guangdong Kaidi Energy Technology Co., Ltd. strives to reflect the highest ethical standards in our relationships with members, providers, and shareholders.
By building an connection around KAIDI and catering specifically to the craft beer crowd, Guangdong Kaidi Energy Technology Co., Ltd. was able to raise the capital and brand awareness needed to successfully break into the domestic market with a groundswell of support.
level gauge has its grasp on oversees market and has a very good repute. Our products are available at very competitive prices.
level gauge is receiving a great positive feedback in the market. And many of our clients are fully satisfied with it.