Classification and selection of ultrasonic flowmeters

There are still many types of ultrasonic flowmeters. Let’s analyze what kind of environment each flowmeter is suitable for according to different usage conditions. 1. Classification of ultrasonic flowmeters Ultrasonic flowmeters are composed of ultrasonic transducers, electronic circuits, flow display and accumulation systems. The transducer generates ultrasonic output under the action of electrical signals, and can convert the received ultrasonic signals into electrical signals. According to the installation method, the ultrasonic flowmeter can be divided into four types: external clip type, internal stick type, plug-in type and portable type. The transducer of the external clip-on ultrasonic flowmeter is fixed outside the pipeline with a special couplant, and the pipeline is not damaged during installation, and the propagation path of the sound wave passes through the pipe wall; for the internal-mounted ultrasonic flowmeter, the transducer is welded and bolted. It is fixed on the inner wall of the flow channel in other ways; the plug-in ultrasonic flowmeter uses a special drilling device to open holes in the pipeline under test, and the flowmeter probe is inserted and installed from the outside of the flow channel through the drilling hole, which solves the problem of the external clamp ultrasonic flowmeter. When measuring thick scaled pipes, it is difficult to receive signals and measure signal attenuation for a long time; portable ultrasonic flowmeters are suitable for mobile measurement and are often used for flow calibration. According to the type of channel structure, ultrasonic flowmeters can be divided into two types: single-channel ultrasonic flowmeters and multi-channel ultrasonic flowmeters. The single-channel ultrasonic flowmeter is to install a pair of transducers on the measured flow channel to form an ultrasonic channel. The multi-channel ultrasonic flowmeter is to install multiple pairs of transducers on the flow channel to form multiple ultrasonic channels, and the results of each channel are combined to obtain the flow rate. 2. Selection of ultrasonic flowmeters For the measurement of flow in small and medium-diameter pipes and channels that do not require high measurement accuracy, monophonic ultrasonic flowmeters are generally used; for large-diameter pipes and pipelines with complex flow distribution. For measurement, a multi-channel ultrasonic flowmeter is generally used. When the ultrasonic flowmeter is used in the hydropower station to measure the passing flow of the turbine, the multi-channel ultrasonic flowmeter (at least 4 channels) is generally used. In the hydropower station, when measuring the passing flow of the unit and the total flow of the power station, it is advisable to use the internal sticking type or the external plugging type ultrasonic flowmeter. The diameter of the penstock in front of the volute of the hydro-generator unit of the hydropower station is generally larger. For the ultrasonic flowmeter arranged on the penstock, if the installation position is in the buried part of the penstock (non-exposed flow channel), the ultrasonic flowmeter adopts the inner sticker. The transducer and cable pipe are clamped on the inner wall of the penstock and fixed by welding; if the installation position is in the open pipe part of the penstock (exposed flow channel), it can be combined with factors such as the diameter of the penstock, accuracy requirements, and installation conditions. Consider plug-in or in-line ultrasonic flow meters. In order to facilitate installation, D should be at least 1.6m when using an internal-mounted ultrasonic flowmeter, and at least 0.8m when using an external-plugging ultrasonic flowmeter (where D is the diameter of the circular section of the installation flow channel or the equivalent diameter of the rectangular section). The above content, the editor thinks that the arrangement is very rich, I don't know whether it has played a decisive role for the friends who use the ultrasonic flowmeter. If you think it is useful, please contact the editor online, and the editor will also recommend it for everyone. your ultrasonic flowmeter.
Guangdong Kaidi Energy Technology Co., Ltd. promises that we will manufature our products in accordance with the strictest quality standards.
Guangdong Kaidi Energy Technology Co., Ltd. aligns itself with customers as partners to assist them in achieving their goals and objectives.
The trend toward using customized level indicator level gauge to ease customized level indicator, once established, soon extended into such additional fields as customized level indicator and customized level indicator.
Unlike the customized level indicator, the is more flexibly used in accasions where customized level indicator .
Although there are various available in the market (such as customized level indicator, customized level indicator, and customized level indicator), recent study results have made this customized level indicator level gauge a preferred level gauge choice of the people.