loading

news-INFO CENTER-Kaidi Sensors-img-1

INFO CENTER

Home > INFO CENTER

What are the requirements for selecting a radar level meter for level measurement in toxic liquid storage tanks?

What are the requirements for selecting a radar level meter for level measurement in toxic liquid storage tanks?

Liquid turbine flowmeter use a few key points

A liquid turbine flow meter is a level measurement instrument commonly used to measure the flow of liquids, and it plays an important role in many industrial and laboratory applications. To ensure the accuracy and reliability of your fluid measurements, here is a guide to using a liquid turbine flow meter

Liquid turbine flowmeter use a few key points

Through several cases to understand the radar level meter measurement value jumps the reason how to solve?

Radar level meter adopts non-contact measurement, and has the advantages of high measurement accuracy, not affected by process conditions, easy to install and easy to maintain, so it is widely used in offshore oil platforms in recent years. Today, we would like to take you through several actual cases in offshore oil platform to understand the reasons and solutions of the radar level meter's measurement value jumping.

Through several cases to understand the radar level meter measurement value jumps the reason how to solve?

Level measurement, which instrumentation is being used now?

Liquid level is the height of the liquid level in a sealed container (pool) or an open container (pool). In addition, liquid level measurement is divided into two categories: continuous measurement and level measurement.

Level measurement, which instrumentation is being used now?

How should radar level meter be used to work stably?

In order to ensure the stable operation of the radar level meter, some methods are described below.

How should radar level meter be used to work stably?

Under what conditions should I choose an explosion-proof radar level meter?

There are some working environments where explosive hazards may exist, such as petrochemical, natural gas and dust-explosive areas. In these environments, the use of explosion-proof radar level meters is necessary to ensure safety and reliability.

Under what conditions should I choose an explosion-proof radar level meter?

Pressure transmitter in the use of the process of easy to encounter problems and solutions

Pressure transmitter in the use of the process of easy to encounter problems and solutions, Kaidi Sensors will tell us.

Pressure transmitter in the use of the process of easy to encounter problems and solutions

Under what circumstances does a radar level meter need to be fitted with a heat sink?

Radar level meters are widely used in industry as a common level measurement device. However, in some specific cases, radar level meters require additional heat sinks for heat dissipation. This article will introduce when a radar level meter needs an additional heat sink and provide an actual measurement case to illustrate the application of the heat sink.

Under what circumstances does a radar level meter need to be fitted with a heat sink?

What types of temperature sensors are commonly used?

Temperature is defined as the energy level of a substance and can be demonstrated by certain changes in that substance. There are many types of temperature measurement sensors and they all have one thing in common: they all measure temperature by sensing some change in physical properties.

What types of temperature sensors are commonly used?

Why should transmitters and sensors use 4～20mA as transmission signal?

4～20mA.DC (1～5V.DC) signal system is the International Electrotechnical Commission (IEC): analog signal standard for process control system. Our country from DDZ-Ⅲ type electric instrumentation began to use this international standard signaling system, instrument transmission signal using 4 ~ 20mA.DC, contact signal using 1 ~ 5V.DC, that is, the use of current transmission, voltage receiving signal system.

Why should transmitters and sensors use 4～20mA as transmission signal?

How to choose the right one formaterial level meter gray powder material measurement?

Ash level measurement instruments has always been a difficult problem in power plants because most of the ash delivery systems use time control, and the time setting is relatively conservative and safe due to the unstable amount of feed to the ash tanks, which results in the silo pumps delivering very little ash but using a large amount of compressed air.

How to choose the right one formaterial level meter gray powder material measurement?

Introduction to the use and advantages of metal tube float flow meters

Metal tube float flowmeter is a commonly used flow measurement instrument, suitable for liquid media flow measurement. The following introduces the principle and characteristics of metal tube float flowmeter:

Introduction to the use and advantages of metal tube float flow meters

Analyzing Non-Contact Radar Level Meters for Dissolving Tank Level Measurement

Accurate measurement of liquid level is crucial for many industries in the industrial production process. Dissolving tanks, as a commonly used equipment, play an important role in chemical, pharmaceutical and food industries. In order to ensure that the liquid level in the dissolving tank can be accurately monitored and controlled, non contact level transmitter have become a viable option!

Analyzing Non-Contact Radar Level Meters for Dissolving Tank Level Measurement

How to choose a level switch and its advantages and disadvantages

Level switch types are diverse, such as float level switch, tuning fork level switch, etc., that we need to understand their respective advantages and disadvantages before choosing.

How to choose a level switch and its advantages and disadvantages

How does the automatic water level monitoring system collect data?

The data acquisition link of the water automation system refers to the process of utilizing various sensors and equipment to automatically collect and transmit hydrometeorological elements such as water level, flow, rainfall, temperature, etc. in the watershed or the measurement area to provide input information for the water automation system.

How does the automatic water level monitoring system collect data?

BETTER TOUCH BETTER BUSINESS

Contact Sales at KAIDI.

CONTACT US

Copyright © 2025 Guangdong Kaidi Energy Technology Co., Ltd. | All Rights Reserved

Chat Online 编辑模式下无法使用

Leave Your Message inputting...

We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist

*Name：

*Phone：

*E-mail：

*Content：