Seven key notes about the magnetic flap level gauge

Seven key notes about the magnetic flap level gauge

1. The installation position of the magnetic flap level gauge indicator is on the outside or top of the tank to indicate and control the current liquid position in the tank. If the container is closed, a drain valve can be installed as needed.

The body tube of the magnetic flap level gauge is made of seamless steel pipe, and the connecting tube is welded by pulling holes. There is no internal scratch. The installation method of the magnetic flap level gauge can be selected from side mounting and top mounting, and the lower end of the magnetic flap level gauge body is sealed.

The connecting flange can accept a control instrument for customized liquid level height. The indicator is composed of magnetic color chips. When the magnetic floating ball in the body tube rises with the liquid level, the color chip turns over, and the liquid level height can be displayed. A magnetic switch or remote transmitter can be installed on the main body tube to output switch signal or analog signal. It is suitable for high pressure, high temperature, corrosion resistance and other occasions, and can be displayed locally and controlled remotely.

2. The magnetic flap level gauge uses the magnetic float as the sensing element, and uses the magnetic coupling between the magnetic float and the magnetic body in the display color column to reflect the measured liquid level or interface.

3. The magnetic flap liquid level gauge uses the principle of the connecting pipe to ensure that the liquid level between the measured container and the measuring pipe body is equal. When the float in the measuring pipe changes with the measured liquid level, the magnetic body in the float and the display board The magnetic body in the color column is shown on the top to make the color column turn over, white means no liquid, red means there is liquid, so as to achieve the value of the liquid level displayed on the spot.

4. The magnetic flap level gauge displayed on the spot has the advantages of intuitive display, eye-catching, wide viewing angle, compact and reasonable structure, safe and reliable, no running, running, dripping, leaking, small maintenance, and low maintenance costs. And its indicating function does not need additional power supply, even if the power supply fails, the liquid level observation will not be affected, it is an ideal liquid level detection instrument.

5. If the magnetic flap liquid level gauge is equipped with UR type resistance liquid level sensor, or UB type resistance-current level transmitter and (secondary) display instrument, it can complete electric remote transmission and output 4~20mA (or 0 ~10mA) standard signal to cooperate with recording instruments, or industrial control computer networking.

6. The magnetic flap liquid level gauge has two installation methods: side-mounted and top-mounted. Either way, the remote transmission device can be bundled, so that the liquid level gauge can display the liquid level on the spot. It can also remotely monitor the liquid level. Binding The latter magnetic flap level gauge can be called a remote transmission type magnetic flap level gauge.

7. Magnetic flap level gauge is also known as magnetic level gauge, magnetic column level gauge, magnetic float level gauge; it works using the principle of magnetic coupling, and the magnetic flap level gauge makes up for the glass tube. The liquid level gauge cannot work under high temperature and high pressure and is fragile.