The installation position of the radar level meter is not suitable, which will easily lead to inaccurate measurement or can not be measured. Radar level meter installation does not meet the requirements, easy to cause false echoes, affecting the measurement effect. Radar level meter installation details need to pay attention to, because it will affect the measurement effect. So, here are a few radar level meter installation tips to share with you.

1: Radar level meter installation as far as possible to choose a location that is easy to debug, easy to install wiring, and easy to disassemble. This is convenient for the installation of radar level meter and easy for later maintenance. If the radar level meter is installed on a tank with a container receiver, pay attention to the end of the antenna to extend the outside of the container, generally at least 10 mm. The purpose of doing so is to prevent the measurement from being influenced by the vessel receiver and the inaccuracy of the measurement.

2: A certain distance should be reserved between the surface of the liquid medium and the radar level meter antenna. General working conditions, the radar level meter antenna and the surface of the liquid medium is not in contact. But under special circumstances, the possibility of contact between the antenna and the surface of the liquid is not excluded. So when installing, pay attention to these small details. If the antenna touches the surface of the liquid medium, it is easy to produce adhesion, which will affect the measurement effect and increase the error value after a long time.

3: When installing the radar level meter, choose a place where the electromagnetic wave signal is not blocked. Some tanks have heating devices, some tanks have switching devices, for these obstacles, radar level meter installation to avoid, if necessary, you can choose to add a reflection plate, or the radar level meter installed in the bypass tube or wave guide tube. This will prevent the influence of the obstacles on the return signal.